GB10055-2007

Safety code for builder's hoist

施工升降机安全规程

GB 10055-2007 ist eine gültige verbindliche chinesische Nationalnorm: Safety code for builder's hoist. Branchencluster: Elektronik. Schwerpunkt: Produktsicherheit. Inkrafttreten: 1. Okt. 2007.

Die Anwendbarkeit hängt vom Produktumfang, dem Zertifizierungsweg, Bekanntmachungen der Behörden und Übergangsregeln ab. Fordern Sie eine Übersetzung an oder prüfen Sie die Quelle, bevor Sie diesen Eintrag für Compliance-Entscheidungen nutzen.

Compliance-Überblick

Dieser Überblick ist derzeit nur auf Englisch verfügbar.

Geltungsbereich und Anwendbarkeit

This standard specifies the safety technical requirements for the design, manufacture, installation, and use of builder's hoists (construction lifts). It applies to both rack and pinion and wire rope type construction hoists as defined in GB/T 10054-2005. It is mandatory for all manufacturers and operators involved in the construction hoist industry in China.

Technische Anforderungen

The standard comprehensively regulates the structural integrity and safety mechanisms of construction hoists. It mandates specific requirements for the foundation, ensuring it can withstand maximum loads under adverse conditions, and sets strict dimensional limits for protective enclosures and landing doors to prevent accidental access. For the cage (car), the standard dictates minimum dimensions, emergency exit specifications, and load-bearing capacities for the floor and roof. It also mandates permanent electrical lighting and emergency lighting systems. Manufacturers must ensure cages are equipped with mechanical locking devices and electrical safety switches to prevent operation when doors are open. The standard details stringent criteria for wire ropes and pulleys, including minimum safety factors and diameter-to-rope ratios for various applications (e.g., lifting, counterweights, safety devices). It also specifies requirements for transmission systems, distinguishing between rack-and-pinion and wire rope drives, and mandates normally closed brakes with specific torque capacities. Critical safety features are addressed, including anti-fall safety devices, which must be progressive for certain hoist types, and various safety switches (limit, ultimate, slack rope). The standard also requires overload protection devices and specifies electrical system requirements, including insulation resistance, grounding, and protection grades (IP ratings) for different components.

Prüfverfahren

The standard references testing and inspection procedures primarily outlined in GB/T 10054-2005. Key evaluations include structural load tests for the cage and mast, verification of verticality deviations for the mast, and functional tests for braking systems and anti-fall safety devices. It also requires inspection of electrical safety mechanisms, including limit switches and overload protection.

Häufige Fragen

What products are regulated under GB 10055-2007?

GB 10055-2007 regulates builder's hoists (construction lifts), encompassing both rack and pinion and wire rope types used in construction.

Are there any updates from the previous version of GB 10055-2007?

Yes, compared to GB 10055-1996, this version adds requirements for mast verticality deviation, marking of standard sections with different wall thicknesses, and mandates buffers for hoists with a capacity of 400kg or more. It also introduces speed limits during installation and maintenance.

Is GB 10055-2007 a mandatory standard?

Yes, the majority of the clauses in GB 10055-2007 are mandatory, except for a few specific recommended clauses (3.2, 8.2.8, 9.2.1, 9.3.6a). Compliance is legally required for market access in China.

The summary above provides a high-level overview of GB 10055-2007. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 10055-2007 today to access all detailed parameters, tables, and testing procedures.

Hinweise zur Anwendbarkeit

Normtyp: Sicherheit
CCS: P97
ICS: 91.220
Zuständige Behörde: Ministry of Industry and Information Technology
Technisches Komitee: Ministry of Industry and Information Technology

Normbeziehungen

Ersetzt:GB 10055-1996