GB23313-2009

Electrical equipment of industrial machines - Electromagnetic compatibility - Emission limits

工业机械电气设备电磁兼容发射限值

GB 23313-2009 ist eine gültige verbindliche chinesische Nationalnorm: Electrical equipment of industrial machines - Electromagnetic compatibility - Emission limits. Branchencluster: Elektronik. Schwerpunkt: Elektrische Sicherheit. Inkrafttreten: 1. Feb. 2010.

Die Anwendbarkeit hängt vom Produktumfang, dem Zertifizierungsweg, Bekanntmachungen der Behörden und Übergangsregeln ab. Fordern Sie eine Übersetzung an oder prüfen Sie die Quelle, bevor Sie diesen Eintrag für Compliance-Entscheidungen nutzen.

Compliance-Überblick

Dieser Überblick ist derzeit nur auf Englisch verfügbar.

Geltungsbereich und Anwendbarkeit

This standard specifies the electromagnetic compatibility (EMC) emission limits for electrical, electronic equipment, and control systems of industrial machines. It applies to equipment with a rated power supply voltage not exceeding AC 1000V or DC 1500V, and a rated frequency not exceeding 200Hz. If specific product or product-family EMC emission standards already exist, those standards take precedence over this general standard. It is primarily designed to ensure that equipment operating in industrial environments does not interfere with other devices.

Technische Anforderungen

The standard establishes emission limits for various ports of industrial machinery equipment, including enclosure ports and AC power ports. For enclosure ports, it regulates radiated emissions within the frequency range of 30 MHz to 1000 MHz. For AC power ports, it sets conducted emission limits across frequency bands from 0.15 MHz to 30 MHz, utilizing both quasi-peak and average value measurements. The standard mandates that measurements must be conducted under conditions that produce maximum electromagnetic emission. It also requires suppliers to provide specific product documentation. Unless the equipment complies with GB 17799.3-2001, suppliers must explicitly warn in writing that the equipment is not suitable for residential, commercial, and light industrial environments. If special measures like shielded cables are required for compliance, this must also be documented.

Prüfverfahren

Testing should be performed according to the referenced basic standards, primarily GB 4824 and GB 4343.1-2003. The evaluation involves measuring radiated disturbances from the enclosure port and conducted disturbances from the AC power port. The test setup requires configuring the Equipment Under Test (EUT) with minimal auxiliary equipment to simulate actual operating conditions, ensuring that the test environment is fully defined and reproducible.

Häufige Fragen

What products are regulated under GB 23313-2009?

GB 23313-2009 regulates the electrical, electronic equipment, and control systems of industrial machines operating at voltages up to AC 1000V or DC 1500V and frequencies up to 200Hz.

Does GB 23313-2009 apply to residential environments?

No, unless the equipment complies with GB 17799.3-2001, the standard requires suppliers to explicitly state that the equipment is not suitable for residential, commercial, and light industrial environments.

What happens if a specific product standard already exists for my equipment?

If a specific product or product-family EMC emission standard already exists for your equipment, that specific standard takes precedence over GB 23313-2009.

The summary above provides a high-level overview of GB 23313-2009. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 23313-2009 today to access all detailed parameters, tables, and testing procedures.

Hinweise zur Anwendbarkeit

Normtyp: Grundlagen
CCS: J09
ICS: 29.020
Zuständige Behörde: Ministry of Industry and Information Technology
Technisches Komitee: Ministry of Industry and Information Technology