GB19872-2005

Rock drilling machines and pneumatic tools-Limited value of noise

凿岩机械与气动工具噪声限值

GB 19872-2005 es una norma nacional china obligatoria vigente: Rock drilling machines and pneumatic tools-Limited value of noise. Sector: Electrónica. Enfoque: Métodos de ensayo. Entrada en vigor: 1 ago 2006.

La aplicabilidad depende del alcance del producto, la vía de certificación, los avisos de la autoridad competente y las reglas de transición. Solicite una traducción o verifique la fuente antes de usar esta ficha en una decisión de cumplimiento.

Resumen de cumplimiento

Este resumen está disponible por ahora solo en inglés.

Alcance y aplicabilidad

This standard applies to rock drilling machines and pneumatic tools, including rock drills, explosion-proof electric rock drills, pneumatic picks, and pneumatic motors. It is mandatory for manufacturers producing these specific equipment types for the Chinese market. The standard does not apply to products outside the specified categories of drilling and pneumatic machinery. It references measurement methods outlined in GB/T 5898.

Requisitos técnicos

The standard establishes mandatory noise limits expressed as sound power levels in dB(A) for various categories of equipment. Compliance with these noise limits is essential for market access. It categorizes limits based on parameters such as machine mass, operating pressure, and product specifications. For instance, handheld rock drills and pneumatic picks have distinct thresholds based on their weight classes. For pneumatic tools, the standard specifies noise limits for equipment like pneumatic grinders, impact wrenches, and screwdrivers. The limits vary according to tool dimensions, such as grinding wheel diameter or screw tightening capacity. Manufacturers must ensure their products do not exceed the specified sound power levels. Additionally, the standard covers pneumatic motors, including piston and vane types, setting specific noise thresholds for different product series. The requirements are divided into mandatory and recommended sections, with the core noise limit tables being strictly enforced. It also references industry standards like JB/T 7737 for specific categorizations.

Métodos de ensayo

Noise measurement procedures must comply with GB/T 5898. Specific tools such as pneumatic drills, grinders, screwdrivers, and polishers are measured under no-load conditions. All other products, including rock drills and pneumatic picks, must be measured under load conditions to determine their sound power levels accurately.

Preguntas frecuentes

What products are regulated under GB 19872-2005?

GB 19872-2005 regulates rock drilling machines and various pneumatic tools, including rock drills, pneumatic picks, grinders, impact wrenches, and pneumatic motors.

Are the noise limits in GB 19872-2005 mandatory?

Yes, the noise limits specified in Chapter 3, Chapter 4, and Chapter 5 are mandatory. Manufacturers must comply with these limits to sell their products in China.

How is noise measured according to this standard?

Noise is measured according to GB/T 5898. Most equipment is tested under load, while specific tools like pneumatic drills and grinders are tested under no-load conditions.

The summary above provides a high-level overview of GB 19872-2005. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 19872-2005 today to access all detailed parameters, tables, and testing procedures.

Indicaciones de aplicabilidad

Tipo: Producto
CCS: J84
ICS: 17.140
Organismo competente: Ministry of Industry and Information Technology
Comité técnico: Ministry of Industry and Information Technology