GB4820-2013

Sawn timber for shaft lifting guide

罐道木

GB 4820-2013 est une norme nationale chinoise obligatoire en vigueur : Sawn timber for shaft lifting guide. Secteur : Machines. Thème principal : Sécurité des produits. Entrée en vigueur : 11 sept. 2014.

L’applicabilité dépend du périmètre du produit, de la voie de certification, des avis des autorités et des règles de transition. Demandez une traduction ou vérifiez la source avant d’utiliser cette fiche pour une décision de conformité.

Aperçu de conformité

Cet aperçu n’est actuellement disponible qu’en anglais.

Champ d’application

This standard applies to sawn timber for shaft lifting guides (罐道木) specifically used in mine shafts. It is not applicable to general construction timber or other industrial wood products. It is essential for manufacturers and suppliers providing wood materials for mining operations in China.

Exigences techniques

This standard specifies the technical requirements for sawn timber for shaft lifting guides (罐道木), including tree species, dimensions, tolerances, and defect limits. Clause 3.4 regarding defect limits is mandatory, while other clauses are recommended. The standard specifies seven tree species, including Abies spp., Picea spp., and Pinus koraiensis, with Latin names provided for clarity. Dimensional requirements include lengths of 6m or 8m, and minimum widths and thicknesses of 210mm, with specific tolerances for length and cross-section. The standard also defines strict defect limits for knots, decay, insect holes, bending, cracks, and blunt edges. Compared to the previous version, the standard expands the applicable tree species and tightens the allowable limits for knots and insect holes.

Méthodes d’essai

The standard outlines testing and evaluation procedures, including sampling methods, dimensional measurement, and material quality assessment. Sampling is conducted according to GB/T 17659.2, while dimensional inspection and material quality evaluation follow GB/T 4822. Volume calculation is performed according to GB/T 449. These procedures ensure consistent quality control and compliance verification for the sawn timber.

Questions fréquentes

What products are regulated under GB 4820-2013?

GB 4820-2013 applies to sawn timber for shaft lifting guides (罐道木), which is specifically used in mine shafts.

Are there any updates from the previous version of GB 4820-2013?

Yes, compared to GB 4820-1995, the updated standard expands the applicable tree species from 6 to 7, adds Latin names, tightens the allowable limits for knots and insect holes, and includes new sampling methods.

Is GB 4820-2013 mandatory?

Clause 3.4 regarding defect limits is mandatory, while the remaining clauses are recommended.

The summary above provides a high-level overview of GB 4820-2013. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 4820-2013 today to access all detailed parameters, tables, and testing procedures.

Indications d’applicabilité

Type: Produit
CCS: B68
ICS: 79.040
Autorité compétente: National Forestry and Grassland Administration
Comité technique: National Technical Committee on Timber of Standardization Administration of China

Relations

Remplace:GB 4820-1995