GB25199-2017

B5 diesel fuels

B5柴油

GB 25199-2017 は現行の中国強制国家規格です：B5 diesel fuels。業界：自動車。テーマ：エネルギー効率。施行日：2017年9月7日。

適用可否は製品範囲、認証ルート、所管当局の通知、移行規定によって異なります。コンプライアンス判断に使う前に、翻訳をご依頼いただくか公式情報源をご確認ください。

コンプライアンス概要

この概要は現在英語のみで提供しています。

適用範囲

This standard applies to B5 diesel fuels used in compression-ignition engines, which are blended from BD100 biodiesel and petroleum diesel. It covers two main categories: B5 ordinary diesel (for tractors, engineering machinery, etc.) and B5 automotive diesel (for vehicles, including Stage V and Stage VI variants). It is mandatory for all manufacturers and suppliers of B5 blended diesel in China. The standard does not apply to pure petroleum diesel or biodiesel blends exceeding 5% volume fraction.

技術要求

The standard specifies comprehensive physical and chemical requirements for B5 diesel, categorized by cold flow properties (pour point and cold filter plugging point) into three grades: No. 5, No. 0, and No. -10. Key parameters include strict limits on sulfur content (max 10 mg/kg), oxidation stability, and fatty acid methyl ester (FAME) content (1.0% to 5.0%). For B5 automotive diesel, the standard enforces additional environmental controls, including limits on polycyclic aromatic hydrocarbons and total contaminant content. Stage VI requirements introduce stricter density ranges and lower polycyclic aromatic hydrocarbon limits compared to Stage V. The standard also incorporates Appendix C, which defines the technical specifications for BD100 biodiesel used as the blending component. BD100 must meet specific thresholds for flash point, glycerin content, and metal impurities to be approved for blending. Additives must not contain known harmful substances, and the intentional addition of methanol is strictly prohibited.

試験方法

Compliance is verified through a series of standardized tests referencing both national (GB/T, SH/T) and international (ASTM, EN) methods. Key evaluations include sulfur content determination via ultraviolet fluorescence (SH/T 0689), oxidation stability testing (SH/T 0175), and FAME content measurement using infrared spectroscopy (GB/T 23801). Cold performance is assessed through cold filter plugging point (SH/T 0248) and pour point (GB/T 510) tests. Appendix B details a qualitative screening method using diphenylamine to detect nitrate-type cetane number improvers.

よくある質問

What products are regulated under GB 25199-2017?

GB 25199-2017 regulates B5 diesel fuels, which are blends of 1% to 5% BD100 biodiesel with petroleum diesel. It covers both B5 ordinary diesel for non-road machinery and B5 automotive diesel for vehicles.

Are there any updates from the previous version of GB 25199-2017?

Yes, this version merges the previous GB 25199-2015 and GB/T 20828-2015 standards. It deletes Stage IV automotive diesel requirements, adds Stage VI requirements, and moves BD100 biodiesel specifications to Appendix C. The flash point requirement for BD100 was also increased from 101°C to 130°C.

How does GB 25199-2017 differ from international standards?

While GB 25199-2017 references several international methods like ASTM D7039 and EN 14107, it establishes China-specific environmental thresholds, such as a strict 10 mg/kg sulfur limit and specific polycyclic aromatic hydrocarbon limits for automotive diesel, aligning with China's Stage VI emission strategies.

The summary above provides a high-level overview of GB 25199-2017. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 25199-2017 today to access all detailed parameters, tables, and testing procedures.

適用のヒント

種別: 製品
CCS: E31
ICS: 75.160.20
所管部門: National Energy Administration
技術委員会: National Energy Administration