GB28288-2025

Foot protection—Protective toecaps

足部防护足趾保护包头

GB 28288-2025 は施行予定の中国強制国家規格です：Foot protection—Protective toecaps。業界：医療。テーマ：製品安全。施行日：2026年9月1日。

適用可否は製品範囲、認証ルート、所管当局の通知、移行規定によって異なります。コンプライアンス判断に使う前に、翻訳をご依頼いただくか公式情報源をご確認ください。

コンプライアンス概要

この概要は現在英語のみで提供しています。

適用範囲

This standard applies to protective toecaps used in foot protection equipment, specifically those integrated into safety footwear. It covers both metal and non-metal toecaps, categorized as either internal or external types. It is mandatory for manufacturers producing safety shoe components for the Chinese market. The standard does not apply to complete shoes or puncture-resistant inserts, which are regulated under separate standards like GB 21148.

技術要求

This standard specifies the technical requirements for protective toecaps used in foot protection equipment, covering both metal and non-metal variants. The core performance parameters include appearance quality, ensuring the toecaps are smooth, free of burrs, and without material defects or delamination. Dimensional requirements dictate the minimum internal length based on the toecap size number and restrict the rolled edge width (≤12mm for metal, ≤15mm for non-metal). The standard mandates strict impact resistance and compression resistance criteria. Following these tests, the toecap must maintain a specified minimum internal clearance and must not develop sharp edges or penetrating cracks. Manufacturers must ensure that the toecap's structural integrity is preserved under both 200J and 100J impact and compression energy levels. Additionally, it outlines specific material characteristics: metal toecaps must demonstrate corrosion resistance, limiting the number and size of corrosion spots after a saltwater exposure test. Non-metal toecaps are subject to stability requirements, requiring them to withstand impact tests after exposure to high temperatures, low temperatures, and oil immersion. Compliance with these material-specific tests is mandatory for market access.

試験方法

The standard details specific testing procedures to verify compliance. Dimensional measurements involve determining the test axis and measuring the internal length and rolled edge width using precision instruments. Impact resistance is tested using a drop-weight impact tester with a specified wedge-shaped hammer and a clay cylinder to measure the residual internal clearance. Compression resistance is evaluated using a pressure testing machine applying a static force, again measuring the clay cylinder's deformation. Corrosion resistance for metal toecaps involves a 48-hour exposure to a 1% sodium chloride solution using wet filter papers. Stability for non-metal toecaps requires subjecting samples to high temperature (70°C), low temperature (-20°C), and oil immersion, followed immediately by impact testing.

よくある質問

What products are regulated under GB 28288-2025?

GB 28288-2025 applies to protective toecaps used as components in foot protection equipment, such as safety shoes. It covers both metal and non-metal toecaps designed to provide toe protection against impact and compression.

Are there any updates from the previous version of GB 28288?

Yes, GB 28288-2025 partially replaces GB/T 28288-2012. The new version removes the requirements for puncture-resistant inserts, focusing solely on protective toecaps. It also introduces new classification criteria, updated definitions for internal/external toecaps, and revised testing methods for non-metal toecap stability.

How does GB 28288-2025 differ from ISO standards?

GB 28288-2025 aligns conceptually with the ISO 22568 series (Parts 1 and 2) for metallic and non-metallic toecaps. However, it incorporates specific Chinese national requirements and references other domestic standards like GB/T 20991-2024 for testing methods, meaning direct equivalence is not guaranteed without a detailed technical comparison.

The summary above provides a high-level overview of GB 28288-2025. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 28288-2025 today to access all detailed parameters, tables, and testing procedures.

適用のヒント

種別: 製品
CCS: C 73
ICS: 13.340.50
所管部門: Ministry of Emergency Management
技術委員会: National Technical Committee on Personal Protective Equipment of Standardization Administration of China