GB19079.3-2005

Operation conditions and Technical requirements for gymnasium and playground Part 3:Bungee jump place

体育场所开放条件与技术要求第3部分:蹦极场所

GB 19079.3-2005은(는) 현행 중국 강제 국가 표준입니다: Operation conditions and Technical requirements for gymnasium and playground Part 3:Bungee jump place. 산업: 소비재. 주제: 제품 안전. 시행일: 2005년 6월 1일.

적용 여부는 제품 범위, 인증 경로, 주관 당국 공고, 전환 규정에 따라 달라집니다. 컴플라이언스 판단에 사용하기 전에 번역을 의뢰하거나 공식 출처를 확인하세요.

컴플라이언스 개요

이 개요는 현재 영어로만 제공됩니다.

적용 범위

This standard applies to all types of bungee jump places that are open to the public, including both artificial and natural-plus-artificial facilities. It is mandatory for any organization operating a commercial bungee jumping venue in China. It does not apply to private or non-commercial training facilities.

기술 요구 사항

The standard specifies comprehensive mandatory requirements for the safe operation of bungee jumping facilities. It dictates strict dimensional and structural criteria for the bungee tower and platform, including minimum dimensions for the platform length, width, and jump arm length. Facility operators must ensure specific spatial clearances between the bungee rope's vertical projection and surrounding obstacles. For the bungee space, the standard outlines safety parameters for rebound points and minimum vertical distances to landing areas, which vary depending on whether the jumping height is above or below 40 meters. It also sets strict guidelines for the lifting and transmission equipment, requiring specific safety coefficients for assist ropes and mechanisms to prevent rope detachment or over-winding. Regarding bungee ropes and jumping gear, the standard mandates that all equipment must obtain product inspection certificates from authorized technical organizations. There are strict limits on the usage count and wear rate of bungee ropes. Additionally, platforms exceeding 20 meters must be equipped with anemometers, and comprehensive rescue and communication systems must be in place.

시험 방법

The standard primarily focuses on design, structural, and operational verification rather than specific laboratory testing methods. It requires safety inspections of equipment against referenced standards such as GB 8408-2000 for amusement ride safety and GB/T 5144-1985 for crane safety protocols. Facilities must undergo regular safety checks and maintain detailed equipment logs. It also involves visual and structural verification of safety clearances, load capacities, and the presence of mandatory rescue and monitoring equipment.

자주 묻는 질문

What types of facilities are regulated under GB 19079.3-2005?

The standard applies to all types of bungee jumping facilities open to the public, including both artificial bungee places and natural-plus-artificial bungee places.

Is GB 19079.3-2005 a mandatory or voluntary standard?

Yes, the entire content of GB 19079.3-2005 is mandatory. All public bungee jumping places must meet these basic conditions and technical requirements to operate legally in China.

Does the standard reference any other related GB standards?

It references several other standards for safety and hygiene, including GB 8408-2000 for amusement machine safety, GB/T 5144-1985 for crane safety, and GB/T 17093 for indoor air quality hygiene.

The summary above provides a high-level overview of GB 19079.3-2005. To ensure complete compliance for your facilities opening in the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 19079.3-2005 today to access all detailed parameters, spatial formulas, and safety procedures.

적용 참고 사항

유형: 관리
CCS: Y55
ICS: 97.220
주관 부처: General Administration of Sport of China
기술 위원회: General Administration of Sport of China