GB23469-2025

Fall protection—Connectors

坠落防护连接器

GB 23469-2025 é uma norma nacional chinesa obrigatória que entrará em vigor: Fall protection—Connectors. Setor: Médico. Foco: Segurança de produtos. Entrada em vigor: 1 de set. de 2026.

A aplicabilidade depende do escopo do produto, da via de certificação, dos avisos da autoridade competente e das regras de transição. Solicite uma tradução ou verifique a fonte antes de usar este registro em uma decisão de conformidade.

Visão geral de conformidade

Esta visão geral está disponível por enquanto apenas em inglês.

Escopo e aplicabilidade

This standard specifies the classification, technical requirements, inspection rules, and permanent marking for fall protection connectors. It is applicable to connectors used for work at heights. This standard is mandatory for all manufacturers producing fall protection equipment for the Chinese market. It is explicitly not applicable to connectors used in sports, firefighting, or other non-industrial applications. The standard references GB/T 12903 for terminology and GB 24543 for safety ropes.

Requisitos técnicos

The standard outlines comprehensive requirements for connectors and connecting components (such as D-rings and O-rings). Key technical parameters include: - Structure and Design: Specifies minimum breaking loads, smooth surfaces without burrs, and specific gate locking mechanisms (e.g., self-locking gates requiring at least two consecutive actions to open). It also defines minimum gate opening dimensions for various connector types. - Static Strength: Establishes minimum static strength limits for both the major (working) axis and minor (auxiliary) axis under different gate locking states. Manufacturers must ensure connectors do not break or open under specified static loads. - Dynamic Performance: Requires that connectors remain closed and unbroken when subjected to dynamic impact forces, ensuring the test mass does not contact the ground. - Corrosion Resistance: After testing, all metal parts must show no visible red rust, though white spots are permitted. This requirement references GB/T 10125 for salt spray testing.

Métodos de ensaio

The standard details specific testing procedures to verify compliance: - Static Strength Test: Utilizes force loading equipment with a capacity of at least 30kN, applying loads at controlled speeds to simulate maximum stress. - Gate Performance and Static Load Tests: Evaluates the gate's ability to function normally after a 6kN load, and its structural integrity under forward (1kN) and lateral (1.5kN) static loads. - Dynamic Performance Test: Involves dropping a 100kg test mass to generate a specific impact force (9kN) to ensure the connector's reliability during a fall. Testing must be conducted using a rigid structure to ensure accurate impact measurement. - Corrosion Resistance Test: Conducted according to GB/T 10125, involving a 24-hour neutral salt spray test (NSS) repeated twice.

Perguntas frequentes

What products are regulated under GB 23469-2025?

It regulates fall protection connectors and connecting components used for work at heights, including basic connectors (Type B), rope-end connectors (Type T), and point connectors (Type A).

Are there any updates from the previous version of GB 23469-2025?

Yes, it replaces GB/T 23469-2009. Key updates include changes to the scope, new classifications, revised static strength requirements, and the addition of dynamic performance requirements and inspection rules.

How does GB 23469-2025 relate to international standards?

The standard references international practices similar to ISO 10333-5 and EN 362, but it has specific Chinese national requirements for testing parameters and marking that must be followed for market access.

The summary above provides a high-level overview of GB 23469-2025. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 23469-2025 today to access all detailed parameters, tables, and testing procedures.

Indicações de aplicabilidade

Tipo: Produto
CCS: C 73
ICS: 13.340.99
Órgão competente: Ministry of Emergency Management
Comitê técnico: National Technical Committee on Personal Protective Equipment of Standardization Administration of China

Relações

Substitui:GB/T 23469-2009