GB28008-2024

Technical specification for the safety of furniture structure

家具结构安全技术规范

GB 28008-2024 é uma norma nacional chinesa obrigatória vigente: Technical specification for the safety of furniture structure. Setor: Eletrônicos. Foco: Segurança de produtos. Entrada em vigor: 1 de jul. de 2025.

A aplicabilidade depende do escopo do produto, da via de certificação, dos avisos da autoridade competente e das regras de transição. Solicite uma tradução ou verifique a fonte antes de usar este registro em uma decisão de conformidade.

Visão geral de conformidade

Esta visão geral está disponível por enquanto apenas em inglês.

Escopo e aplicabilidade

This standard specifies the general safety requirements for furniture structures and specific structural safety requirements for certain products. It applies to all furniture except for infant and children's furniture, which is regulated under GB 28007-2024. Manufacturers of office screens, folding beds, laboratory furniture, bathroom furniture, bunk beds, and glass furniture must comply with this standard.

Requisitos técnicos

The standard outlines comprehensive structural safety requirements to prevent injuries during normal use. It mandates that accessible edges and corners must be rounded or protected, with a minimum radius of 0.5mm. Components must be securely fastened without loose parts or missing nails. It also specifies requirements for push-pull components to have anti-drop devices and for wheeled products to have locking mechanisms. A significant portion of the standard addresses shear and squeeze points. These hazardous points must not be accessible during intended use or normal operation. The standard provides a specific judgment flow (detailed in Annex A) and uses a hemispherical finger probe to test accessible gaps, ensuring they are either smaller than 7mm or larger than 18mm to prevent finger entrapment. Specific product categories have dedicated requirements. For instance, bunk beds must have safety barriers with specific height and gap limitations to prevent falls and entrapment. Glass furniture must adhere to strict size, thickness, and assembly rules depending on whether the glass is tempered, semi-tempered, or flat, and whether it is load-bearing or decorative. Load-bearing glass components must pass rigorous impact and strength tests.

Métodos de ensaio

The standard references various testing methods to verify compliance, including: - Stability tests for office screens and bunk beds. - Cycle testing for folding mechanisms in folding beds. - Water resistance tests for laboratory furniture surfaces. - Strength and durability tests for hanging bathroom cabinets. - Impact tests (drop ball and shot bag) and surface stress measurements for glass furniture components. - Use of hemispherical finger probes for gap and hole measurements.

Perguntas frequentes

What products are regulated under GB 28008-2024?

It applies to all furniture except infant and children's furniture, including office screens, folding beds, laboratory furniture, bathroom furniture, bunk beds, and glass furniture.

Does GB 28008-2024 replace any previous standards?

Yes, it replaces GB 22792.2-2008 and partially replaces several others like GB 26172.1-2010, GB 24820-2009, GB 24977-2010, and GB 28008-2011.

What are the key safety concerns addressed for glass furniture?

The standard specifies size and thickness limits based on glass type (tempered, semi-tempered, flat) and usage (load-bearing vs. decorative), along with requirements for edge treatment, hole placement, and structural strength against impacts.

The summary above provides a high-level overview of GB 28008-2024. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 28008-2024 today to access all detailed parameters, tables, and testing procedures.

Indicações de aplicabilidade

Tipo: Segurança
CCS: Y80
ICS: 97.140
Órgão competente: Ministry of Industry and Information Technology
Comitê técnico: Ministry of Industry and Information Technology

Relações

Substitui:GB 22792.2-2008

Substitui parcialmente:GB 26172.1-2010 (Vigente) , GB 24820-2009, GB 24977-2010, GB 24430.1-2009, GB 28008-2011, GB 28478-2012