Resumo em português · Tradução disponível
GB4053.1-2009
Safety requirements for fixed steel ladders and platform - Part 1: Steel vertical ladders
固定式钢梯及平台安全要求 第1部分：钢直梯
GB 4053.1-2009 é uma norma nacional chinesa obrigatória vigente: Safety requirements for fixed steel ladders and platform - Part 1: Steel vertical ladders. Setor: Alimentos. Foco: Segurança de produtos. Entrada em vigor: 1 de dez. de 2009.
A aplicabilidade depende do escopo do produto, da via de certificação, dos avisos da autoridade competente e das regras de transição. Solicite uma tradução ou verifique a fonte antes de usar este registro em uma decisão de conformidade.
Visão geral de conformidade
Esta visão geral está disponível por enquanto apenas em inglês.
Escopo e aplicabilidade
This standard applies to fixed steel vertical ladders used in workplaces within industrial enterprises. It covers the basic safety requirements for the design, manufacture, and installation of these structures. This standard is mandatory except for the terms and definitions chapter. It does not apply to ladders that are regulated by other specific standards.
Requisitos técnicos
The standard specifies material requirements, mandating that the mechanical properties of steel shall not be lower than Q235-B with a qualified carbon content guarantee. It also outlines the design load limits, including specific vertical concentrated live loads for stiles, rungs, and supports. Manufacturers must ensure all structural components can withstand the specified loads without exceeding allowable deflection limits. In terms of structural design, the standard dictates the inclination angle (75° to 90°), inside clear width, and ladder section height limits. It mandates the use of safety cages when the climbing height exceeds specific thresholds to prevent falls. Additionally, it details the dimensional requirements for rungs and stiles, which vary depending on whether the ladder is used in normal or abnormal environments, such as damp or corrosive conditions. The standard also addresses manufacturing and installation practices, requiring welded connections in compliance with GB50205. It mandates anti-rust and anti-corrosion measures, such as painting or hot-dip galvanizing, and requires lightning protection grounding for outdoor installations in accordance with GB50057.
Métodos de ensaio
This standard primarily focuses on design, manufacturing, and installation specifications rather than laboratory testing methods. However, compliance assessment involves structural verification of load capacity to ensure stiles, rungs, and supports can endure the specified vertical and pull-out loads. Visual and dimensional inspections of anti-corrosion coatings and structural integrity are also required to verify adherence to the manufacturing standards.
Perguntas frequentes
What products are regulated under GB 4053.1-2009?
It applies to fixed steel vertical ladders used in workplaces within industrial enterprises, specifying safety requirements for their design, manufacture, and installation.
Is GB 4053.1-2009 a mandatory standard?
Yes, this standard is mandatory except for the terms and definitions chapter. Manufacturers and facilities must comply with its provisions for industrial applications.
What are the key updates in GB 4053.1-2009 compared to the previous version?
Updates include added load provisions for ladder supports, inclination angle ranges, lightning protection grounding requirements, and specific dimensional requirements for ladders used in abnormal environments.
The summary above provides a high-level overview of GB 4053.1-2009. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 4053.1-2009 today to access all detailed parameters, tables, and testing procedures.
Indicações de aplicabilidade
- Tipo
- Segurança
- CCS
- C68
- ICS
- 13.100
- Órgão competente
- Ministry of Emergency Management
- Comitê técnico
- Ministry of Emergency Management