GB4053.2-2025

Safety requirements for fixed metal ladders and platform—Part 2: Inclined ladders

固定式金属梯及平台安全要求第2部分：斜梯

GB 4053.2-2025 é uma norma nacional chinesa obrigatória que entrará em vigor: Safety requirements for fixed metal ladders and platform—Part 2: Inclined ladders. Setor: Alimentos. Foco: Segurança de produtos. Entrada em vigor: 1 de jan. de 2027.

A aplicabilidade depende do escopo do produto, da via de certificação, dos avisos da autoridade competente e das regras de transição. Solicite uma tradução ou verifique a fonte antes de usar este registro em uma decisão de conformidade.

Visão geral de conformidade

Esta visão geral está disponível por enquanto apenas em inglês.

Escopo e aplicabilidade

This standard applies to the design, manufacturing, and installation of fixed metal inclined ladders used in industrial enterprise workplaces. It is mandatory for all manufacturers producing such equipment for the Chinese market. It does not apply to ladders installed on nuclear facilities, ships, lifting machinery, or power transmission towers. It replaces the previous GB 4053.2-2009.

Requisitos técnicos

The standard specifies comprehensive safety requirements covering angle of pitch and flight height (maximum 6m per flight). It details strict load-bearing capacities for stiles and treads, including uniform and concentrated live loads. Structural requirements encompass clearance dimensions, inside clear width, and specific combinations of going and rise dimensions. Manufacturers must ensure anti-corrosion and lightning protection measures are implemented according to referenced standards like GB 50057.

Métodos de ensaio

Compliance is primarily verified through structural load assessments. The standard mandates that treads and stiles must withstand specified uniform and concentrated live loads without exceeding allowable deflection limits (e.g., 1/100 or 10mm for spiral ladders). Engineers must calculate structural integrity based on these load parameters rather than conducting a singular standardized physical test.

Perguntas frequentes

What products are regulated under GB 4053.2-2025?

It regulates fixed metal inclined ladders, including spiral ladders, used in industrial workplaces.

Are there any updates from the previous version of GB 4053.2-2025?

Yes, it replaces GB 4053.2-2009, adding requirements for spiral ladders, grating treads, protective railings, intermediate platforms, and warning information.

Does GB 4053.2-2025 apply to ladders on ships?

No, it explicitly excludes ladders installed on ships, nuclear facilities, lifting machinery, and power transmission towers.

The summary above provides a high-level overview of GB 4053.2-2025. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 4053.2-2025 today to access all detailed parameters, tables, and testing procedures.

Indicações de aplicabilidade

Tipo: Segurança
CCS: C 68
ICS: 13.100
Órgão competente: Ministry of Emergency Management
Comitê técnico: National Technical Committee on Work Safety of Standardization Administration of China

Relações

Substitui:GB 4053.2-2009 (Vigente)