Описание на русском · Доступен перевод
GB14544-2008
Production of vinyl chloride from calcium carbide and acetylene-safety technology code
电石乙炔法生产氯乙烯安全技术规程
GB 14544-2008 — действующий обязательный национальный стандарт Китая: Production of vinyl chloride from calcium carbide and acetylene-safety technology code. Отрасль: Машины. Тема: Безопасность продукции. Дата вступления в силу: 1 дек. 2009 г..
Применимость зависит от продукции, схемы сертификации, уведомлений компетентных органов и переходных правил. Закажите перевод или проверьте источник, прежде чем использовать эту запись в решениях по соответствию.
Обзор требований
Этот обзор пока доступен только на английском языке.
Область применения
This standard applies to newly built, renovated, and expanded facilities producing vinyl chloride and its polymers using the calcium carbide acetylene method. It covers production safety, piping, equipment, maintenance, and emergency handling. It is mandatory for all manufacturers in this sector, while related PVC production departments should use it as a reference.
Технические требования
The standard specifies comprehensive safety protocols for the production of vinyl chloride, focusing on fire and explosion prevention, electrical safety, and static electricity control. It mandates that production facilities in the synthesis, compression, rectification, and polymerization areas be classified as Class A fire hazard zones with adequate fire resistance ratings. Facilities must implement strict gas concentration monitoring, ensuring the time-weighted average allowable concentration of vinyl chloride in the workplace does not exceed 10mg/m³. For equipment and materials, the standard prohibits the use of copper, silver, and mercury in components contacting vinyl chloride, requiring materials like stainless steel or cast iron. It sets specific material control indicators for gases, such as strict limits on free chlorine and oxygen content in hydrogen chloride. Operators must strictly control intermediate material indicators to prevent explosive reactions, such as chloroacetylene formation. The standard also outlines rigorous requirements for polymerization kettles and gas holders, including the installation of safety valves, pressure gauges, and interlock systems for over-temperature and over-pressure scenarios. It dictates that gas holders must operate within 15% to 85% of their total volume and restricts usage during thunderstorms or strong winds. Effective exhaust and recovery systems must be installed to minimize vinyl chloride emissions and ensure residual monomer levels in finished products comply with relevant resin standards.
Методы испытаний
The standard mandates several critical testing and verification procedures, including airtightness tests for all synthesis, rectification, and polymerization equipment before operation. It requires pressure testing (hydraulic and pneumatic) and leakage tests for piping systems, utilizing non-flammable and non-toxic gases. Regular atmospheric monitoring for vinyl chloride and oxygen concentrations is required during operations, particularly during special maintenance tasks like cleaning caldron work and hot work, where gas concentrations must be analyzed every 2 hours.
Частые вопросы
What products and facilities are regulated under GB 14544-2008?
It applies to newly built, renovated, and expanded facilities producing vinyl chloride and its polymers using the calcium carbide acetylene method. It is mandatory for all such manufacturers and serves as a reference for related PVC production departments.
Are there any major updates from the previous GB 14544-1993 version?
The 2008 version expanded the scope, added requirements for emergency response plans, updated electrical and lightning protection standards, and introduced specific safety mandates for polyvinyl chloride paste resin production. It also updated permissible concentration limits for vinyl chloride.
How does GB 14544-2008 differ from international ISO safety standards?
While it shares similarities with general international chemical safety standards, GB 14544-2008 is tailored specifically to the calcium carbide acetylene process prevalent in China. It mandates specific localized compliance measures for Chinese regulatory approval.
The summary above provides a high-level overview of GB 14544-2008. To ensure complete compliance for your chemical facilities entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 14544-2008 today to access all detailed parameters, tables, and testing procedures.
Подсказки по применимости
- Тип
- Безопасность
- CCS
- A65
- Компетентное ведомство
- Ministry of Emergency Management
- Технический комитет
- National Technical Committee on Work Safety of Standardization Administration of China