Описание на русском · Доступен перевод
GB15744-2019
The limits and measurement methods of fuel consumption for motorcycles and mopeds
摩托车和轻便摩托车燃油消耗量限值及测量方法
GB 15744-2019 — действующий обязательный национальный стандарт Китая: The limits and measurement methods of fuel consumption for motorcycles and mopeds. Отрасль: Электроника. Тема: Методы испытаний. Дата вступления в силу: 1 июл. 2020 г..
Применимость зависит от продукции, схемы сертификации, уведомлений компетентных органов и переходных правил. Закажите перевод или проверьте источник, прежде чем использовать эту запись в решениях по соответствию.
Обзор требований
Этот обзор пока доступен только на английском языке.
Область применения
This standard applies to motorcycles and mopeds powered by spark-ignition engines, as well as positive three-wheeled motorcycles powered by compression-ignition engines. It is not applicable to vehicles exclusively fueled by gaseous fuels or alcohols. This standard replaces GB 15744-2008 and GB 16486-2008.
Технические требования
The standard specifies the mandatory fuel consumption limits for various categories of motorcycles and mopeds. Limits are determined based on engine displacement, vehicle type (two-wheeled, sidecar, or three-wheeled), and transmission type (manual or automatic). Manufacturers must ensure their vehicle models meet the specified limits to achieve type approval in China. The standard also details the calculation methods for fuel consumption, combining results from different test phases using specific weighting factors.
Методы испытаний
Fuel consumption is evaluated through Type I tests (operating cycle on a chassis dynamometer) and Type II tests (constant speed at reference speed on a road or dynamometer). The standard permits several measurement methods, including flow measurement, volumetric measurement, gravimetric measurement, and the carbon balance method. Specific environmental conditions and vehicle preparation procedures must be strictly followed during testing.
Частые вопросы
What products are regulated under GB 15744-2019?
It regulates motorcycles and mopeds with spark-ignition engines, and positive three-wheeled motorcycles with compression-ignition engines.
Does GB 15744-2019 apply to electric motorcycles?
No, this standard specifically addresses fuel consumption for internal combustion engine vehicles. It also excludes vehicles exclusively using gaseous or alcohol fuels.
What is the implementation date for GB 15744-2019?
The standard was implemented on July 1, 2020. All newly approved models must comply, and existing approved models must comply within 13 months of implementation.
The summary above provides a high-level overview of GB 15744-2019. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 15744-2019 today to access all detailed parameters, tables, and testing procedures.
Подсказки по применимости
- Тип
- Охрана окружающей среды
- CCS
- T80
- ICS
- 43.140
- Компетентное ведомство
- Ministry of Industry and Information Technology
- Технический комитет
- Ministry of Industry and Information Technology