Описание на русском · Доступен перевод
GB17675-2025
Steering system of motor vehicles—Basic requirements
汽车转向系 基本要求
GB 17675-2025 — вступающий в силу обязательный национальный стандарт Китая: Steering system of motor vehicles—Basic requirements. Отрасль: Электроника. Тема: Безопасность продукции. Дата вступления в силу: 1 июл. 2026 г..
Применимость зависит от продукции, схемы сертификации, уведомлений компетентных органов и переходных правил. Закажите перевод или проверьте источник, прежде чем использовать эту запись в решениях по соответствию.
Обзор требований
Этот обзор пока доступен только на английском языке.
Область применения
This standard specifies the technical requirements and type approval criteria for steering systems of motor vehicles. It applies to M, N, and O category vehicles as defined in GB/T 15089. This standard is mandatory for all relevant manufacturers and does not apply to pneumatic steering transmission systems or vehicles equipped with autonomous steering systems.
Технические требования
The standard mandates that steering systems must ensure ease and safety of operation within the maximum design speed. It specifies requirements for steering control force, self-centering ability, and straight-line driving performance. Additionally, it requires that the steering direction corresponds continuously with the steering control equipment's deflection. For trailers, the standard outlines criteria for straight-line tracking, turning circle radius differences, and swing-out values. In terms of failure provisions, it details the performance requirements for power-assisted steering and full-power steering systems during various fault conditions, ensuring that the vehicle remains controllable and that steering control force does not exceed specified limits. The standard requires clear warning signals (red and yellow) for steering faults, particularly for full-power steering vehicles equipped with an energy management system. Furthermore, it incorporates comprehensive functional safety requirements for steering electronic control systems, aligning with GB/T 34590, including hazard analysis, risk assessment, and safety measures documentation.
Методы испытаний
The standard outlines testing procedures for both motor vehicles and trailers, including tests for abnormal vibration when leaving a turning circle, steering self-centering ability, and steering control force measurement under normal and fault conditions. It also specifies additional tests for full-power steering systems, such as figure-eight maneuvers and lane change operations to verify performance during power source or energy transmission failures.
Частые вопросы
What products are regulated under GB 17675-2025?
It regulates the steering systems of M, N, and O category vehicles, including passenger cars, commercial vehicles, and trailers.
Are there any updates from the previous version of GB 17675?
Yes, the 2025 version replaces the 2021 edition, introducing new terms related to energy management, updated functional safety requirements for electronic control systems, and specific provisions for full-power steering systems.
Does GB 17675-2025 apply to autonomous steering systems?
No, the standard explicitly excludes vehicles equipped with autonomous steering systems and pneumatic steering transmission systems.
The summary above provides a high-level overview of GB 17675-2025. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 17675-2025 today to access all detailed parameters, tables, and testing procedures.
Подсказки по применимости
- Тип
- Безопасность
- CCS
- T 23
- ICS
- 43.040.50
- Компетентное ведомство
- Ministry of Industry and Information Technology
- Технический комитет
- National Technical Committee on Automobiles of Standardization Administration of China
Связи
Заменяет:GB 17675-2021 (Действует)