Описание на русском · Доступен перевод

ДействуетОбязательный

GB17835-2024

Water based extinguishing agent

水系灭火剂

GB 17835-2024 — действующий обязательный национальный стандарт Китая: Water based extinguishing agent. Отрасль: Экология. Тема: Безопасность продукции. Дата вступления в силу: 1 дек. 2025 г..

Применимость зависит от продукции, схемы сертификации, уведомлений компетентных органов и переходных правил. Закажите перевод или проверьте источник, прежде чем использовать эту запись в решениях по соответствию.

Обзор требований

Этот обзор пока доступен только на английском языке.

Область применения

This standard applies to the research and development, production, and inspection of water based extinguishing agents. It specifically covers agents formulated by adding additives such as penetrants and flame retardants to water. It is not applicable to foam extinguishing agents or dry chemical powders. Manufacturers of fire safety equipment must ensure their water-based products comply with these updated regulations.

Технические требования

The standard specifies comprehensive physical and chemical requirements for both the original solution and the mixed solution of the extinguishing agent. Key parameters include freezing point, pH values, and sediment volume, which must remain within defined tolerances before and after temperature treatment. Manufacturers must declare characteristic values for freezing points and Class A fire ratings. A major focus of this revision is the introduction of biological and environmental safety requirements. The standard mandates testing for fish acute toxicity, acute oral toxicity in mice, and eye irritation in rats, categorizing the agents into Tier 1 and Tier 2 based on toxicity levels. Compliance with these eco-toxicological parameters is mandatory for market access. Additionally, the standard outlines requirements for material compatibility and performance. It sets strict corrosion rate limits for Q235A steel and 3A21 aluminum. Performance metrics such as permeability and Class A fire extinguishing performance (minimum 1A rating) are also rigorously defined to ensure operational reliability.

Методы испытаний

The standard mandates a series of rigorous evaluation procedures, including temperature cycling tests (freeze-thaw stability) to assess long-term storage viability. Chemical and physical tests measure freezing point, pH, and sediment volume. Specific biological tests using zebrafish, mice, and rats are required to evaluate acute toxicity and eye irritation. Furthermore, corrosion rate tests using metal coupons and fire suppression tests using portable extinguishers are conducted to verify real-world performance.

Частые вопросы

What products are regulated under GB 17835-2024?

This standard regulates water based extinguishing agents, which are formulated by adding additives such as penetrants and flame retardants to water to improve fire suppression performance. It applies to the R&D, production, and inspection of these agents.

Are there any updates from the previous version of GB 17835?

The 2024 version introduces new requirements for stability, acute oral toxicity, eye irritation, and permeability. It also adds technical requirements for the original solution's freezing point, pH, and corrosion rate, while removing the requirements for surface tension and Class B fire extinguishing performance found in the 2008 version.

How does GB 17835-2024 relate to other fire safety standards?

The standard references several Chinese standards, such as GB 4351 for portable fire extinguishers and GB 15308 for foam extinguishing agents. Manufacturers must ensure their testing protocols align with these referenced GB standards when demonstrating compliance.

The summary above provides a high-level overview of GB 17835-2024. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 17835-2024 today to access all detailed parameters, tables, and testing procedures.

Подсказки по применимости

Тип
Продукция
CCS
C84
ICS
13.220.10
Компетентное ведомство
National Fire and Rescue Administration
Технический комитет
National Technical Committee on Fire Protection of Standardization Administration of China

Связи

Заменяет:GB 17835-2008