Описание на русском · Доступен перевод
GB20075-2020
Passenger handholds and footrests on motorcycles
摩托车乘员扶手和脚踏
GB 20075-2020 — действующий обязательный национальный стандарт Китая: Passenger handholds and footrests on motorcycles. Отрасль: Электроника. Тема: Безопасность продукции. Дата вступления в силу: 1 янв. 2022 г..
Применимость зависит от продукции, схемы сертификации, уведомлений компетентных органов и переходных правил. Закажите перевод или проверьте источник, прежде чем использовать эту запись в решениях по соответствию.
Обзор требований
Этот обзор пока доступен только на английском языке.
Область применения
This standard applies to the technical requirements and testing methods for passenger handholds (straps and handles) and footrests on motorcycles. Specifically, it covers two-wheeled motorcycles, the main vehicle of side-vehicle-equipped three-wheeled motorcycles, and positive three-wheeled motorcycles utilizing a saddle seat configuration. It is mandatory for all newly approved models and existing approved models within 25 months of implementation. The standard also governs auxiliary or additional devices serving these functions.
Технические требования
The standard outlines general and special requirements for passenger support devices. For handhold straps and handles, the standard mandates specific installation positions to ensure passenger convenience and specifies strict load-bearing capacities against vertical upward forces. For footrests, it dictates minimum spatial dimensions for foot placement and requires structural integrity against vertical downward pressure. Furthermore, the standard requires that assistive devices and additional devices with handhold or footrest functions must meet the corresponding category requirements. Manufacturers must explicitly declare the passenger handhold system and the locations of all devices in the vehicle's technical documentation.
Методы испытаний
GB 20075-2020 introduces specific test methods detailed in its normative appendices. This includes the Strap Device Test (Appendix A), the Handle Device Test (Appendix B), and the Footrest Device Test (Appendix C). These tests evaluate the structural integrity of the devices by applying static vertical forces to specific points on the devices until the required load limits are reached. Devices must not fracture, detach, or suffer permanent deformation affecting functionality to pass the tests.
Частые вопросы
What types of vehicles are regulated under GB 20075-2020?
The standard applies to two-wheeled motorcycles, side-vehicle-equipped three-wheeled motorcycles (main vehicle), and positive three-wheeled motorcycles utilizing a saddle seat configuration.
Are there any updates from the previous version of GB 20075?
The 2020 version replaces GB 20075-2006. Key updates include the addition of technical requirements for footrests, new definitions for handholds and footrests, requirements for assistive devices, and the introduction of specific test methods in the normative appendices.
Does GB 20075-2020 apply to auxiliary or additional devices?
Yes, the standard specifies that auxiliary or additional devices with handhold or footrest functions must comply with the corresponding technical requirements based on their categorized function (strap, handle, or footrest).
The summary above provides a high-level overview of GB 20075-2020. To ensure complete compliance for your motorcycles entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 20075-2020 today to access all detailed parameters, test setup diagrams, and testing procedures.
Подсказки по применимости
- Тип
- Безопасность
- CCS
- T80
- ICS
- 43.140
- Компетентное ведомство
- Ministry of Industry and Information Technology
- Технический комитет
- Ministry of Industry and Information Technology
Связи
Заменяет:GB 20075-2006