Описание на русском · Доступен перевод
GB25522-2010
Mineral processing equipment - Safety requirements
矿物洗选设备 安全要求
GB 25522-2010 — действующий обязательный национальный стандарт Китая: Mineral processing equipment - Safety requirements. Отрасль: Электроника. Тема: Безопасность продукции. Дата вступления в силу: 1 окт. 2011 г..
Применимость зависит от продукции, схемы сертификации, уведомлений компетентных органов и переходных правил. Закажите перевод или проверьте источник, прежде чем использовать эту запись в решениях по соответствию.
Обзор требований
Этот обзор пока доступен только на английском языке.
Область применения
This standard applies to mineral processing equipment, including classification, magnetic separation, flotation, gravity separation, and dewatering equipment. It covers safety requirements during the lifecycle of the machinery but excludes general mechanical, electrical, hydraulic, and pneumatic hazards covered by other standards. This standard is mandatory for all manufacturers of mineral processing equipment entering the Chinese market.
Технические требования
The standard outlines a comprehensive list of hazards associated with mineral processing equipment and specifies safety requirements and measures to mitigate them. Key areas include general safety measures aligned with ergonomic principles, protection against contact with hot/cold surfaces, and ensuring adequate operational and maintenance space. It mandates specific requirements for operation positions, such as providing operator cabins in harsh environments, ensuring noise levels do not exceed 85dB(A), and maintaining dust concentrations below 2mg/m3. Control systems must comply with GB/T 16855.1, featuring emergency stop devices and automatic alarms. Manufacturers must ensure that all moving parts are properly guarded and that filter presses with high-speed filter plates are equipped with photoelectric protection. The standard also details requirements for stability, electrical equipment, and hydraulic systems. Equipment must be securely anchored, electrical components must be grounded and protected in hazardous environments, and hydraulic systems must include pressure and temperature monitoring. Furthermore, it provides extensive guidelines for installation, operation, maintenance, and the design of platforms and access ways, referencing standards like GB 17888.2 and GB 4053.
Методы испытаний
Testing and verification methods referenced in the standard include noise measurement at the operator's position according to GB/T 13325, vibration evaluation of operator seats via GB/T 8419, and dust concentration measurement in the workplace using GB/T 5748. These ensure compliance with the specified environmental and safety limits.
Частые вопросы
What products are regulated under GB 25522-2010?
GB 25522-2010 regulates mineral processing equipment, specifically including mineral classification, magnetic separation, flotation, gravity separation, and dewatering equipment.
Are there specific environmental limits for operator cabins?
Yes, the standard mandates that noise in the main operator cabin must not exceed 85dB(A), and dust concentration must not exceed 2mg/m3. Compliance with these limits is mandatory for operator safety.
Does GB 25522-2010 cover all machinery hazards?
No, it focuses on hazards specific to mineral processing equipment. General mechanical, electrical, hydraulic, and pneumatic hazards are covered by other referenced standards like GB/T 15706.1 and GB/T 15706.2.
The summary above provides a high-level overview of GB 25522-2010. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 25522-2010 today to access all detailed parameters, tables, and testing procedures.
Подсказки по применимости
- Тип
- Безопасность
- CCS
- D96
- ICS
- 73.120
- Компетентное ведомство
- Ministry of Industry and Information Technology
- Технический комитет
- Ministry of Industry and Information Technology