Описание на русском · Доступен перевод
GB30000.7-2013
Rules for classification and labelling of chemicals - Part 7: Flammable liquids
化学品分类和标签规范 第7部分：易燃液体
GB 30000.7-2013 — действующий обязательный национальный стандарт Китая: Rules for classification and labelling of chemicals - Part 7: Flammable liquids. Отрасль: Электроника. Тема: Маркировка и классификация. Дата вступления в силу: 1 нояб. 2014 г..
Применимость зависит от продукции, схемы сертификации, уведомлений компетентных органов и переходных правил. Закажите перевод или проверьте источник, прежде чем использовать эту запись в решениях по соответствию.
Обзор требований
Этот обзор пока доступен только на английском языке.
Область применения
This standard applies to the classification and labelling of flammable liquids according to the Globally Harmonized System of Classification and Labelling of Chemicals (GHS). It specifically covers liquids with a flash point not exceeding 93°C. This standard is mandatory for chemical manufacturers and suppliers dealing with flammable liquids in the Chinese market. It replaces the previous GB 20581-2006.
Технические требования
GB 30000.7-2013 establishes the criteria for classifying flammable liquids into four distinct hazard categories based on their physical properties, specifically flash point and initial boiling point. Chapters 4 and 6 of this standard are designated as mandatory. The standard specifies the required label elements for each hazard category, including hazard pictograms, signal words (either "Danger" or "Warning"), and hazard statements. It also details the necessary precautionary statements covering general, prevention, response, storage, and disposal measures. Additionally, the standard mandates the inclusion of product identifiers and supplier identification on the chemical labels.
Методы испытаний
To determine the appropriate classification, the standard references specific testing methods for measuring flash point and initial boiling point. Flash point should primarily be determined using closed cup test methods (such as those outlined in ISO 2719 or ASTM D93). Initial boiling point can be determined using methods like ISO 3924 or ASTM D86. Accurate test data is essential for correct hazard categorization.
Частые вопросы
What products are regulated under GB 30000.7-2013?
It regulates flammable liquids with a flash point up to 93°C, requiring them to be classified and labelled according to GHS principles.
Are there any updates from the previous version of this standard?
Yes, it replaces GB 20581-2006, aligning its technical content with the fourth revised edition of the UN GHS, and updates the terminology and label element allocations.
Is this standard mandatory?
Yes, Chapters 4 and 6 concerning classification criteria and labelling requirements are mandatory for compliance in China.
The summary above provides a high-level overview of GB 30000.7-2013. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 30000.7-2013 today to access all detailed parameters, classification tables, and testing procedures.
Подсказки по применимости
- Тип
- Основополагающий
- CCS
- A80
- Компетентное ведомство
- Ministry of Industry and Information Technology
- Технический комитет
- Ministry of Industry and Information Technology
Связи
Заменяет:GB 20581-2006