Описание на русском · Доступен перевод
GB4053.3-2025
Safety requirements for fixed metal ladders and platform—Part 3: Industrial guardrails and platform
固定式金属梯及平台安全要求 第3部分：工业防护栏杆及平台
GB 4053.3-2025 — вступающий в силу обязательный национальный стандарт Китая: Safety requirements for fixed metal ladders and platform—Part 3: Industrial guardrails and platform. Отрасль: Пищевая. Тема: Безопасность продукции. Дата вступления в силу: 1 янв. 2027 г..
Применимость зависит от продукции, схемы сертификации, уведомлений компетентных органов и переходных правил. Закажите перевод или проверьте источник, прежде чем использовать эту запись в решениях по соответствию.
Обзор требований
Этот обзор пока доступен только на английском языке.
Область применения
This standard applies to the design, manufacture, and installation of fixed metal guardrails and platforms used in workplaces within industrial enterprises. It explicitly excludes installations on nuclear facilities, ships, lifting machinery, power transmission towers, mast towers, communication towers, and meteorological towers. This standard is mandatory for industrial facilities operating in China. It serves as a crucial compliance document for engineers designing industrial access systems.
Технические требования
The standard outlines general requirements, including platform inclination angles, material selection, and the setup of guardrails and toe boards. Manufacturers must ensure guardrails are installed when the vertical height exceeds 1200mm. It also covers anti-corrosion and lightning protection grounding requirements. It details structural requirements for guardrails, specifying guardrail heights based on the vertical height to the falling surface. The standard regulates the spacing of posts, top rails, handrails, and intermediate rails to prevent falls. Specific dimensions for toe boards are also established to prevent object drop hazards. For platform structures, it defines the minimum dimensions for work platforms, walking platforms, and intermediate platforms. It specifies overhead clearance requirements and platform board specifications, including anti-slip measures and maximum allowable gaps between adjacent plates or gratings. A significant update in this version is the introduction of requirements for self-closing gates and mezzanine gates, including their load capacities and structural functions. Additionally, it mandates the provision of usage instructions and warning information, referencing GB 2894 for safety colors and signs.
Методы испытаний
While primarily a design and installation standard, it specifies structural load verification procedures to ensure safety. Guardrails and platforms must withstand specific concentrated live loads and distributed live loads, with strict limits on allowable deflection. Construction quality acceptance must align with referenced standards such as GB 50205 and GB 50576. Compliance verification involves structural load testing and installation quality inspection. Materials must also meet performance requirements for bearing capacity and deformation under environmental conditions.
Частые вопросы
What products are regulated under GB 4053.3-2025?
It regulates fixed metal guardrails and platforms used in industrial workplaces, including work platforms, walking platforms, and intermediate platforms for ladders.
Are there any updates from the previous version of GB 4053.3-2025?
Yes, it replaces GB 4053.3-2009 with updated requirements for guardrail setup, materials, loads, and structural forms. It also adds new chapters for gates, usage instructions, and warning information.
Does GB 4053.3-2025 apply to all types of towers?
No, it explicitly excludes guardrails and platforms installed on nuclear facilities, ships, lifting machinery, power transmission towers, mast towers, communication towers, and meteorological towers.
The summary above provides a high-level overview of GB 4053.3-2025. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 4053.3-2025 today to access all detailed parameters, tables, and testing procedures.
Подсказки по применимости
- Тип
- Безопасность
- CCS
- 68
- ICS
- 13.100
- Компетентное ведомство
- Ministry of Emergency Management
- Технический комитет
- National Technical Committee on Work Safety of Standardization Administration of China
Связи
Заменяет:GB 4053.3-2009 (Действует)