GB17907-2010
Mechanical parking systems - General safety requirement
机械式停车设备 通用安全要求
GB 17907-2010 is a current mandatory Chinese national standard for Mechanical parking systems - General safety requirement. It appears in the Electronics compliance cluster with a product safety focus and has an implementation date of Dec 1, 2011.
Applicability depends on product scope, certification route, competent authority notices and transition rules. Requst for the translation or verify source before using this record in a compliance decision.
Compliance overview
Scope and applicability
This standard specifies the basic safety requirements for the design, manufacture, inspection, and use of various categories of mechanical parking systems. It is applicable to all types of mechanical parking equipment but excludes maintenance car lifts, building requirements, and peripheral equipment. The standard addresses hazards such as mechanical failures, electrical faults, and unexpected vehicle drops.
Technical requirements
The standard outlines comprehensive safety requirements for metal structures and design configurations. It specifies load considerations including vertical static/dynamic loads, horizontal loads, and seismic loads. Manufacturers must ensure sufficient strength, stiffness, and stability of load-bearing structures in compliance with referenced standards like GB 50017 and GB/T 3811. For mechanical and electrical mechanisms, the standard mandates specific safety criteria for lifting components such as steel wire ropes, chains, and screws. It also details requirements for braking systems, hydraulic systems, and electrical equipment, including enclosure protection levels and electromagnetic interference resistance. Critical safety devices like emergency stop switches and anti-falling mechanisms are mandatory for specific equipment categories. Dimensional requirements are strictly defined for access points, pedestrian walkways, and parking spaces to accommodate suitable vehicles safely. Additionally, the standard introduces specific safety protocols for transfer areas, ensuring safe transitions between manual driving and automated parking system control.
Testing methods
The standard requires regular inspections to maintain compliance. Frequent inspections should be conducted at least monthly, focusing on operational performance, safety devices, and wear of components like wire ropes and chains. Periodic inspections must be performed at least annually, covering structural deformations, main component wear, and control system reliability, as outlined in the referenced standard GB/T 15706.2-2006.
FAQs
What products are regulated under GB 17907-2010?
GB 17907-2010 regulates all categories of mechanical parking systems, covering their design, manufacture, inspection, and use. It excludes maintenance car lifts and peripheral equipment.
Are there any updates from the previous version of GB 17907?
Yes, compared to GB 17907-1999, this version adds terms and definitions, design requirements, enclosure protection levels for electrical equipment, electromagnetic interference resistance, and safety requirements for transfer areas.
How does GB 17907-2010 relate to international standards?
The standard references several national standards that are aligned with or modified from international standards, such as ISO 606 for roller chains and IEC 60529 for enclosure protection ratings.
The summary above provides a high-level overview of GB 17907-2010. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 17907-2010 today to access all detailed parameters, tables, and testing procedures.
Applicability hints
- Type
- Safety
- CCS
- J80
- ICS
- 53.020.99
- Competent department
- Ministry of Industry and Information Technology
- Technical committee
- Ministry of Industry and Information Technology
Relationships
Replaces:GB 17907-1999