GB19997-2005
Limits for noise emitted by combine harvester
谷物联合收割机 噪声限值
GB 19997-2005 is a current mandatory Chinese national standard for Limits for noise emitted by combine harvester. It appears in the Electronics compliance cluster with a product safety focus and has an implementation date of Jul 1, 2006.
Applicability depends on product scope, certification route, competent authority notices and transition rules. Requst for the translation or verify source before using this record in a compliance decision.
Compliance overview
Scope and applicability
This standard applies to all types of <b>self-propelled grain combine harvesters</b> operating in the agricultural sector. It specifically regulates both dynamic environmental noise and noise levels at the operator's position. Compliance is mandatory for all manufacturers distributing these machines in China.
Technical requirements
GB 19997-2005 establishes <b>mandatory noise emission limits</b> for combine harvesters based on their cab configuration. The standard categorizes operator environments into three distinct types: <b>enclosed cabs</b> (fully sealed with climate control), <b>general operation cabs</b> (fully enclosed without AC), and <b>simple cabs or open stations</b> (providing only basic weather protection). The standard sets specific maximum allowable decibel levels for both <b>dynamic environmental noise</b> and <b>operator-position noise</b>. Manufacturers must ensure their equipment does not exceed the prescribed dB(A) limits for their specific cab category. The strictest limits are applied to premium enclosed cabs, while more lenient thresholds are given to simple or open cab configurations.
Testing methods
Noise evaluation under this standard relies on established industry methodologies. <b>Dynamic environmental noise</b> is measured according to the procedures outlined in JB/T 6268 (Self-propelled harvesting machinery noise determination method). <b>Operator-position noise</b> is measured following the acoustic measurement guidelines specified in GB/T 16955.
FAQs
What products are regulated under GB 19997-2005?
This standard regulates the noise emitted by all types of <b>self-propelled combine harvesters</b> used in grain harvesting. It is mandatory for all manufacturers targeting the Chinese market.
How does GB 19997-2005 classify different types of combine harvesters?
The standard classifies harvesters into three categories for noise limits: <b>enclosed cabs</b> (with climate control), <b>general operation cabs</b> (simple enclosure without AC), and <b>simple cabs or no cab</b> (open operator stations).
What testing standards are referenced for noise measurement in GB 19997-2005?
Dynamic environmental noise is measured according to the procedures specified in JB/T 6268, while noise at the operator's position is measured following the GB/T 16955 acoustics standard.
The summary above provides a high-level overview of GB 19997-2005. To ensure complete compliance for your agricultural machinery entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 19997-2005 today to access all detailed parameters, tables, and testing procedures.
Applicability hints
- Type
- Safety
- CCS
- B91
- ICS
- 65.060.50
- Competent department
- Ministry of Industry and Information Technology
- Technical committee
- Ministry of Industry and Information Technology
Relationships
Replaced by:GB 19997-2025 (Upcoming)