GB20181-2006
Mine hoists and mine winders Safety requirements
矿井提升机和矿用提升绞车 安全要求
GB 20181-2006 is a current mandatory Chinese national standard for Mine hoists and mine winders Safety requirements. It appears in the Electronics compliance cluster with a product safety focus and has an implementation date of Oct 1, 2006.
Applicability depends on product scope, certification route, competent authority notices and transition rules. Requst for the translation or verify source before using this record in a compliance decision.
Compliance overview
Scope and applicability
This standard applies to the safety requirements for electrically or hydraulically driven friction mine hoists, winding mine hoists, disc-brake mine winders, and block-brake mine winders. It is mandatory for both explosion-proof and non-explosion-proof types used in mining operations. However, it does not apply to belt-brake mine winders. Compliance with GB/T 15706.1 is also referenced for general machinery safety.
Technical requirements
The standard outlines comprehensive safety measures addressing various hazards identified during the equipment's lifecycle, including mechanical, electrical, and hydraulic failures. It specifies strict requirements for operational safety, component integrity, and control systems. Manufacturers must ensure that all technical content complies with the mandatory provisions outlined in this document. Key technical requirements cover the dimensional ratios between drums, friction wheels, and steel wire ropes, ensuring adequate safety factors for different mining applications (coal vs. metal/non-metal mines). The standard also dictates specific limits for braking performance, including braking torque ratios and safety braking deceleration values under various operational states. GB 16542 is referenced for cage safety. Furthermore, the standard mandates specific protection devices for the electrical control systems, such as overwind, overspeed, and depth indicator failure protections. These safety devices must be configured in an independent dual-line format to ensure redundancy. Requirements for hydraulic systems, including cleanliness levels and pressure testing, are also specified in accordance with GB/T 3766.
Testing methods
Testing methods include noise measurement at the operator position according to GB/T 13325, ultrasonic flaw detection for main shafts and welds (GB/T 11345 and JB/T 1581), and braking torque measurement using force gauges. Hydraulic system performance and cleanliness are tested per GB/T 3766 and GB/T 17489. Explosion-proof performance must be verified according to the GB 3836 series.
FAQs
What products are regulated under GB 20181-2006?
It regulates electrically or hydraulically driven friction mine hoists, winding mine hoists, and disc/block brake mine winders, excluding belt-brake mine winders.
Is GB 20181-2006 a mandatory standard?
Yes, all technical content in GB 20181-2006 is mandatory for manufacturers of the specified mining equipment.
What are the key safety protections required by this standard?
The standard requires independent dual-line protection devices for overwind, overspeed, and depth indicator failures, along with strict braking system performance criteria.
The summary above provides a high-level overview of GB 20181-2006. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 20181-2006 today to access all detailed parameters, tables, and testing procedures.
Applicability hints
- Type
- Safety
- CCS
- D93
- ICS
- 73.100.40
- Competent department
- Ministry of Industry and Information Technology
- Technical committee
- Ministry of Industry and Information Technology