GB25523-2010
Mechanical mining shovel - Safety requirements
矿用机械正铲式挖掘机 安全要求
GB 25523-2010 is a current mandatory Chinese national standard for Mechanical mining shovel - Safety requirements. It appears in the Electronics compliance cluster with a product safety focus and has an implementation date of Oct 1, 2011.
Applicability depends on product scope, certification route, competent authority notices and transition rules. Requst for the translation or verify source before using this record in a compliance decision.
Compliance overview
Scope and applicability
This standard applies to mechanical mining shovels used in open-pit mines and engineering projects, specifically those defined in GB/T 10604-2008. It addresses safety requirements and risk reduction during the machine's lifecycle. Manufacturers must ensure compliance to mitigate physical and operational hazards.
Technical requirements
The standard outlines comprehensive safety measures addressing various hazards identified in the risk assessment. It specifies requirements for the operator's cab, including ergonomic design, visibility, and environmental controls such as temperature regulation and air filtration. Manufacturers must design cabs using flame-retardant materials to ensure operator safety. The standard also mandates specific dimensions and vibration limits for seating, referencing GB/T 8419 for testing. Control systems and devices must meet Category 1 requirements as defined in GB/T 16855.1-2008. The standard details the necessity of emergency stop devices, control layouts, and maximum operating forces for various control types. It is mandatory to install devices preventing unauthorized startup and ensuring safe shutdown during emergencies. The document sets forth requirements for pneumatic control and lubrication systems, emphasizing pressure safety valves and hose routing to prevent hazards. Electrical equipment must comply with GB 5226.1, including specific provisions for cables, cable reels, and residual current protection devices. Proper grounding and insulation are critical to prevent electrical hazards. Additionally, the standard covers braking systems, crowd and hoist mechanisms, platforms, and fire protection systems. It mandates the installation of portable fire extinguishers in critical areas and specifies environmental limits for dust, noise, and vibration. Compliance with these operational environment limits is essential for worker safety.
Testing methods
- Vibration Testing: Evaluation of seat vibration using methods specified in GB/T 8419. - Noise Measurement: Determination of noise at the operator's position under static and dynamic conditions per GB/T 16710.3 and GB/T 16710.5. - Dust Concentration Measurement: Assessment of dust levels in the operator's cab according to GB/T 5748. - Electrical Insulation Testing: Verification of main circuit insulation resistance as per GB 50150.
FAQs
What products are regulated under GB 25523-2010?
GB 25523-2010 regulates mechanical mining shovels used in open-pit mines and engineering projects, specifically those conforming to the definitions in GB/T 10604-2008.
Are the safety requirements in GB 25523-2010 mandatory?
Yes, except for Chapter 3 which is recommended, all other chapters of this standard are mandatory. Manufacturers must adhere to these requirements to ensure product safety.
What are the key environmental controls required in the operator's cab?
The standard requires temperature regulation (15°C to 28°C), air purification to limit dust concentration, and noise control. Fully enclosed cabs must address pressurization, sealing, and thermal insulation.
The summary above provides a high-level overview of GB 25523-2010. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 25523-2010 today to access all detailed parameters, tables, and testing procedures.
Applicability hints
- Type
- Safety
- CCS
- D92
- ICS
- 73.100.30
- Competent department
- Ministry of Industry and Information Technology
- Technical committee
- Ministry of Industry and Information Technology