GB25683-2010
Molten steel ladle - Safety requirements
钢液浇包 安全要求
GB 25683-2010 is a current mandatory Chinese national standard for Molten steel ladle - Safety requirements. It appears in the Electronics compliance cluster with a product safety focus and has an implementation date of Jan 1, 2012.
Applicability depends on product scope, certification route, competent authority notices and transition rules. Requst for the translation or verify source before using this record in a compliance decision.
Compliance overview
Scope and applicability
This standard applies to the design, manufacturing, and usage safety requirements of molten steel ladles utilized in steelmaking and casting production. It covers the specific equipment used in these heavy industrial environments. This standard is mandatory for all manufacturers producing or supplying molten steel ladles in the Chinese market. It does not apply to other types of metal melting or handling equipment, focusing exclusively on molten steel ladles.
Technical requirements
The standard specifies comprehensive safety requirements addressing mechanical, electrical, thermal, and other associated hazards. For mechanical safety, it outlines material specifications for critical structural components (such as the barrel body, lifting lugs, and trunnions) and mandates specific design safety factors (e.g., a factor of 10 for lifting lugs and 5 for crossbeams). Manufacturers must ensure the ladle features a reliable self-locking mechanism and can withstand at least 2 times the rated load without abnormal phenomena. Regarding electrical safety, the standard requires compliance with GB 5226.1 and mandates proper thermal insulation and reliable fixation of cables to prevent electric shock and unexpected movements. For thermal safety, the standard requires the use of personal protective equipment, specific clearance heights for the molten metal surface, and strict prohibitions against using ladles with cracked linings. It is strictly forbidden to cool the hot ladle with water to prevent explosion hazards.
Testing methods
Compliance is verified through four primary judgment methods. Functional testing is used to check if safety functions meet requirements under operational conditions. Testing involves using measuring instruments to check specific parameters against standardized methods. Calculation or drawing inspection is applied to analyze aspects like stability, center of gravity, and mechanical strength. Finally, Observation relies on visual inspection of specified components and usage information. If multiple methods are used, their results must be consistent to demonstrate compliance.
FAQs
What products are regulated under GB 25683-2010?
The standard applies to the design, manufacturing, and safe use of molten steel ladles specifically used in steelmaking and casting production facilities.
Is GB 25683-2010 a mandatory standard?
Yes, all technical content within GB 25683-2010 is mandatory for manufacturers producing or selling molten steel ladles in the Chinese market.
How does GB 25683-2010 relate to international safety standards?
While it addresses general safety principles similar to ISO standards, it incorporates specific Chinese national standards (GB/T) for materials, electrical equipment (GB 5226.1), and ergonomic design, requiring localized compliance verification.
The summary above provides a high-level overview of GB 25683-2010. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 25683-2010 today to access all detailed parameters, material specifications, and testing procedures.
Applicability hints
- Type
- Safety
- CCS
- J61
- ICS
- 25.120.30
- Competent department
- Ministry of Industry and Information Technology
- Technical committee
- Ministry of Industry and Information Technology