GB30000.2-2013
Rules for classification and labelling of chemicals - Part 2：Explosives
化学品分类和标签规范 第2部分：爆炸物
GB 30000.2-2013 is a current mandatory Chinese national standard for Rules for classification and labelling of chemicals - Part 2：Explosives. It appears in the Electronics compliance cluster with a labeling & classification focus and has an implementation date of Nov 1, 2014.
Applicability depends on product scope, certification route, competent authority notices and transition rules. Requst for the translation or verify source before using this record in a compliance decision.
Compliance overview
Scope and applicability
This standard applies to the classification and labelling of explosive substances, mixtures, and articles in accordance with the UN Globally Harmonized System of Classification and Labelling of Chemicals (GHS). It covers solid or liquid substances, pyrotechnic substances, and articles designed to produce an explosive or pyrotechnic effect. It is mandatory for manufacturers and suppliers handling explosive chemicals in China. The standard replaces the previous GB 20576-2006.
Technical requirements
The standard specifies the classification criteria for explosives, dividing them into six divisions based on their hazard characteristics: 1.1 (mass explosion hazard), 1.2 (projection hazard), 1.3 (fire hazard with minor blast or projection hazard), 1.4 (no significant hazard), 1.5 (very insensitive substances with mass explosion hazard), and 1.6 (extremely insensitive articles with no mass explosion hazard). It outlines the labelling requirements for each division, including the use of specific hazard pictograms, signal words (such as Danger or Warning), and hazard statements. Suppliers must ensure that product identifiers and supplier identifications are clearly presented on the label. Additionally, the standard details the allocation of precautionary statements categorized into general, prevention, response, storage, and disposal. It references the UN Recommendations on the Transport of Dangerous Goods for further technical alignment.
Testing methods
Classification involves a three-step procedure based on the UN Manual of Tests and Criteria. This includes Test Series 1 to confirm explosive properties, Test Series 2 to 4 for the acceptance procedure, and Test Series 5 to 7 to determine the hazard division. Test Series 8 is used to evaluate the sensitivity of ammonium nitrate emulsions. The standard also provides guidance on screening procedures, such as calculating oxygen balance and evaluating thermal stability, to determine if a substance can be excluded from the explosives classification.
FAQs
What products are regulated under GB 30000.2-2013?
The standard regulates explosive substances, mixtures, and articles, including pyrotechnic substances and articles designed to produce an explosive or pyrotechnic effect.
Is GB 30000.2-2013 mandatory?
Yes, Chapter 4 and Chapter 6 of this standard are mandatory, while the rest are recommended. Compliance is required for chemical classification and labelling in China.
How does GB 30000.2-2013 relate to international standards?
The technical content is consistent with the UN Globally Harmonized System of Classification and Labelling of Chemicals (GHS) (Fourth revised edition) and references the UN Recommendations on the Transport of Dangerous Goods.
The summary above provides a high-level overview of GB 30000.2-2013. To ensure complete compliance for your explosive products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 30000.2-2013 today to access all detailed parameters, classification logic, and labelling requirements.
Applicability hints
- Type
- Foundational
- CCS
- A80
- Competent department
- Ministry of Industry and Information Technology
- Technical committee
- Ministry of Industry and Information Technology
Relationships
Replaces:GB 20576-2006