GB30000.8-2013
Rules for classification and labelling of chemicals - Part 8: Flammable solids
化学品分类和标签规范 第8部分：易燃固体
GB 30000.8-2013 is a current mandatory Chinese national standard for Rules for classification and labelling of chemicals - Part 8: Flammable solids. It appears in the Electronics compliance cluster with a labeling & classification focus and has an implementation date of Nov 1, 2014.
Applicability depends on product scope, certification route, competent authority notices and transition rules. Requst for the translation or verify source before using this record in a compliance decision.
Compliance overview
Scope and applicability
This standard applies to the classification and labelling of flammable solids according to the UN Globally Harmonized System of Classification and Labelling of Chemicals (GHS). It covers powdery, granular, or pasty substances, as well as metal powders that are easily ignitable. It is mandatory for chemical manufacturers and suppliers dealing with flammable solids in China. Note that aerosols are excluded from this standard and are regulated under GB 30000.4.
Technical requirements
The standard specifies the classification criteria for flammable solids, dividing them into two hazard categories based on their burning rate and behavior. Category 1 represents a higher hazard level, while Category 2 represents a lower hazard level. Manufacturers must classify their products based on the physical form in which they are supplied or transported. For non-metal powders, classification depends on whether the wetted zone can act as a flame retardant and the specific burning time or burning rate. For metal powders, the classification is determined by the time it takes for the flame to spread along the entire length of the sample. The standard also details the mandatory labelling requirements, including the use of specific hazard pictograms, signal words ("Danger" or "Warning"), and hazard statements. Labels must include product identifiers, supplier details, and appropriate precautionary statements. The label elements are assigned according to the UN Recommendations on the Transport of Dangerous Goods.
Testing methods
Classification testing must be conducted using the N.1 test method as described in the UN Recommendations on the Transport of Dangerous Goods: Manual of Tests and Criteria. The procedure involves a preliminary screening test followed by a burning rate test to determine the specific hazard category.
FAQs
What products are regulated under GB 30000.8-2013?
It regulates flammable solids, including powdery, granular, or pasty substances and metal powders that can be easily ignited by brief contact with an ignition source.
Does GB 30000.8-2013 align with international standards?
Yes, the technical content is consistent with the fourth revised edition of the UN Globally Harmonized System of Classification and Labelling of Chemicals (GHS).
What are the key labelling elements required by this standard?
Labels must feature the designated hazard pictogram (flame), signal words ("Danger" or "Warning"), hazard statements, product identifiers, and supplier information.
The summary above provides a high-level overview of GB 30000.8-2013. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 30000.8-2013 today to access all detailed parameters, tables, and testing procedures.
Applicability hints
- Type
- Foundational
- CCS
- A80
- Competent department
- Ministry of Industry and Information Technology
- Technical committee
- Ministry of Industry and Information Technology
Relationships
Replaces:GB 20582-2006