GB6376-2008
Limites of tractor noise
拖拉机 噪声限值
GB 6376-2008 is a current mandatory Chinese national standard for Limites of tractor noise. It appears in the Electronics compliance cluster with a product safety focus and has an implementation date of Jul 1, 2009.
Applicability depends on product scope, certification route, competent authority notices and transition rules. Requst for the translation or verify source before using this record in a compliance decision.
Compliance overview
Scope and applicability
This standard specifies the environmental and operator position noise limits for agricultural and forestry tractors. It applies specifically to wheeled tractors, crawler tractors, and walking tractors. Compliance with this standard is mandatory for all tractor manufacturers entering the Chinese market. Testing procedures are referenced from GB/T 3871.8, GB/T 15833, and GB/T 6229.
Technical requirements
GB 6376-2008 establishes the mandatory noise emission limits for various categories of tractors used in agriculture and forestry. The standard categorizes tractors based on their drive type, including direct-drive, belt-drive, and crawler configurations. Technical requirements are differentiated by the tractor's rated power (measured in kW) and the type of cab installed. Specifically, it sets distinct dB(A) limits for both environmental noise (static and dynamic) and noise at the operator's position. The standard also provides specific limits for tractors equipped with an enclosed cab as defined in GB/T 6960.7-2007. Manufacturers must ensure their products meet these tiered limits based on power and configuration to achieve compliance.
Testing methods
The standard outlines specific testing methodologies to measure noise levels accurately. Environmental noise and operator position noise for agricultural tractors are measured according to GB/T 3871.8. For forestry tractors, testing follows the procedures in GB/T 15833, while walking tractors are tested per GB/T 6229. Accurate measurement under these specified conditions is critical for certification.
FAQs
What products are regulated under GB 6376-2008?
The standard regulates the noise limits for agricultural and forestry tractors, specifically covering wheeled tractors, crawler tractors, and walking tractors.
Is GB 6376-2008 a mandatory standard?
Yes, all technical contents of this standard are mandatory for relevant products sold or operated in China.
What did GB 6376-2008 update from the previous version?
Compared to GB 6376-1995, this version re-categorizes tractors based on type and power, and modifies the specific noise limit values to align with current technological capabilities.
The summary above provides a high-level overview of GB 6376-2008. To ensure complete compliance for your tractors entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 6376-2008 today to access all detailed parameters, noise limit tables, and testing procedures.
Applicability hints
- Type
- Safety
- CCS
- T60
- ICS
- 65.060.10
- Competent department
- Ministry of Industry and Information Technology
- Technical committee
- Ministry of Industry and Information Technology