GB6514-2023
Safety code of practice for coating—Safety and ventilation for coating process
涂装作业安全规程 涂漆工艺安全及其通风
GB 6514-2023 is a current mandatory Chinese national standard for Safety code of practice for coating—Safety and ventilation for coating process. It appears in the Food compliance cluster with a product safety focus and has an implementation date of Oct 1, 2024.
Applicability depends on product scope, certification route, competent authority notices and transition rules. Requst for the translation or verify source before using this record in a compliance decision.
Compliance overview
Scope and applicability
This standard specifies the safety technical requirements for pretreatment processes, coating processes, and their associated ventilation systems during coating operations. It is applicable to the design, installation, and use of these systems in industrial manufacturing facilities. This standard does not apply to outdoor coating operations for large structures such as bridges, buildings, large storage tanks, and ships.
Technical requirements
The standard mandates comprehensive safety protocols for coating operations, categorized into general requirements, pretreatment, and coating processes. It requires that operations using flammable and explosive substances be located on the ground floor near exterior walls, and strict fire and explosion prevention measures must be implemented across all designated work areas. For pretreatment process safety, the standard outlines specific guidelines for organic solvent degreasing, paint stripping, and mechanical/chemical treatments. It prohibits the use of open-flame stripping and mandates that mechanical rust removal processes, such as shot blasting, must be fully enclosed with interlocked ventilation systems to protect operators. Regarding coating process safety, the document specifies requirements for various application methods including air spraying, air-mixing spraying, electrostatic coating, and electrophoretic painting. It dictates that paint storage and mixing must occur in dedicated rooms with explosion-proof electrical equipment and anti-static flooring. Equipment for high-pressure spraying must undergo rigorous pressure and airtightness testing to prevent catastrophic failures. The standard also details ventilation safety requirements, emphasizing the use of local exhaust ventilation as the primary control method. It introduces the concept of individual ventilation systems for unmanned or robotic maintenance areas, ensuring supplied air quality meets strict thresholds for oxygen, carbon monoxide, and oil mist content.
Testing methods
The standard emphasizes operational safety verification through system interlocks and environmental monitoring rather than standalone laboratory tests. Key evaluation procedures include verifying the interlocking mechanisms between ventilation systems and coating equipment, monitoring combustible gas concentrations (which must not exceed 25% of their lower explosive limit), and assessing the air quality parameters of individual ventilation systems. Facilities must continuously monitor occupational exposure limits in accordance with referenced standards such as GBZ 2.1.
FAQs
What products and operations are regulated under GB 6514-2023?
This standard applies to the design, installation, and use of pretreatment processes, coating processes, and their associated ventilation systems in coating operations. It does not apply to outdoor coating operations for large structures such as bridges, buildings, large storage tanks, and ships.
Are there any significant updates from the previous versions of this standard?
The current version merges the previous GB 6514-2008 and GB 7692-2012. Key updates include the addition of individual ventilation and recirculating air definitions, the deletion of specific parameter tables (like fire risk classification and temperature limits), and the addition of safety requirements for air-mixing spray processes and paint mixing room ventilation.
How does GB 6514-2023 relate to other coating safety standards?
While GB 6514-2023 establishes the foundational safety framework for coating processes, it frequently references specific national standards for particular equipment and procedures. For instance, spray booth safety aligns with GB 14444, and electrostatic spraying requirements align with GB 12367. Engineers must review these interconnected standards to ensure comprehensive compliance.
The summary above provides a high-level overview of GB 6514-2023. To ensure complete compliance for your coating operations and products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 6514-2023 today to access all detailed parameters, safety protocols, and testing procedures.
Applicability hints
- Type
- Safety
- CCS
- C72
- ICS
- 13.100
- Competent department
- Ministry of Emergency Management
- Technical committee
- National Technical Committee on Work Safety of Standardization Administration of China
Relationships
Replaces:GB 6514-2008, GB 7692-2012