GB11779-2005

The minimum mesh size of the trawl cod-end in the East China Sea and Yellow Sea

东海、黄海区拖网网囊最小网目尺寸

GB 11779-2005 ist eine gültige verbindliche chinesische Nationalnorm: The minimum mesh size of the trawl cod-end in the East China Sea and Yellow Sea. Branchencluster: Lebensmittel. Schwerpunkt: Produktsicherheit. Inkrafttreten: 1. Okt. 2005.

Die Anwendbarkeit hängt vom Produktumfang, dem Zertifizierungsweg, Bekanntmachungen der Behörden und Übergangsregeln ab. Fordern Sie eine Übersetzung an oder prüfen Sie die Quelle, bevor Sie diesen Eintrag für Compliance-Entscheidungen nutzen.

Compliance-Überblick

Dieser Überblick ist derzeit nur auf Englisch verfügbar.

Geltungsbereich und Anwendbarkeit

This standard applies to otter trawls (specifically those with a cod-end) used by motorized fishing vessels operating in the continental shelf fisheries outside the fishing restriction lines in the East China Sea and Yellow Sea. It is mandatory for all relevant fishing operations within these designated marine areas. It does not apply to fishing gears used in inland waters or other sea areas.

Technische Anforderungen

The standard strictly mandates the structural and dimensional requirements for trawl cod-ends to ensure sustainable fishing practices. The core requirement specifies that the minimum mesh size for the trawl cod-end must not be smaller than 54mm. This measurement specifically refers to the mesh size of a single-layer cod-end structure after water shrinkage. Furthermore, the standard explicitly prohibits the use of double-layer cod-end netting to prevent technical circumvention of the mesh size regulations. Compliance with these structural limits is mandatory for all manufacturers and operators.

Prüfverfahren

Mesh size is expressed as the inner diameter of the mesh and must be measured according to the procedures defined in GB/T 6964. The pre-tension applied during these measurements must follow the specifications outlined in GB/T 6965. Basic terminology and definitions used for the fishing gear materials are referenced from SC/T 5001.

Häufige Fragen

What products and operations are regulated under GB 11779-2005?

This standard regulates the minimum mesh size of trawl cod-ends used by motorized fishing vessels operating in the continental shelf fisheries outside the fishing restriction lines in the East China Sea and Yellow Sea.

Are there any updates from the previous version, GB 11779-1989?

The main updates include adjustments to the cod-end structure, an increase in the minimum mesh size to 54mm, and the explicit prohibition of using double-layer cod-end netting.

Can I use a double-layer cod-end net to meet the minimum mesh size requirement?

The standard mandates that the minimum mesh size refers to the mesh size of a single-layer cod-end structure after water shrinkage. Double-layer cod-end netting is strictly prohibited under this standard.

The summary above provides a high-level overview of GB 11779-2005. To ensure complete compliance for your fishing equipment operating in Chinese waters, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 11779-2005 today to access all detailed parameters, measurement procedures, and regulatory references.

Hinweise zur Anwendbarkeit

Normtyp: Grundlagen
CCS: B56
ICS: 65.150
Zuständige Behörde: Ministry of Agriculture and Rural Affairs
Technisches Komitee: National Technical Committee on Aquatic Products of Standardization Administration of China

Normbeziehungen

Ersetzt:GB 11779-1989