GB25519-2010

Feeders for mineral processing - Safety requirements

矿用给料设备安全要求

GB 25519-2010 ist eine gültige verbindliche chinesische Nationalnorm: Feeders for mineral processing - Safety requirements. Branchencluster: Elektronik. Schwerpunkt: Produktsicherheit. Inkrafttreten: 1. Okt. 2011.

Die Anwendbarkeit hängt vom Produktumfang, dem Zertifizierungsweg, Bekanntmachungen der Behörden und Übergangsregeln ab. Fordern Sie eine Übersetzung an oder prüfen Sie die Quelle, bevor Sie diesen Eintrag für Compliance-Entscheidungen nutzen.

Compliance-Überblick

Dieser Überblick ist derzeit nur auf Englisch verfügbar.

Geltungsbereich und Anwendbarkeit

This standard is applicable to various types of mineral processing feeders, including plate, belt, chain, reciprocating, disc, screw, scraper, and vibrating feeders. It specifies safety requirements from physical performance and intended use perspectives. This standard is mandatory for all manufacturers of mineral feeding equipment entering the Chinese market. It does not cover general mechanical, electrical, hydraulic, or pneumatic hazards already addressed in GB/T 15706.1 and GB/T 15706.2.

Technische Anforderungen

The standard outlines a comprehensive list of 29 potential hazards during the equipment's lifecycle, including crushing, shearing, electrical shocks, and fire. It mandates that safety measures align with ergonomic principles to reduce operator fatigue and prevent injuries from sharp edges or hot surfaces. Manufacturers must ensure adequate operational and maintenance space around the feeders. For operator positions, the standard requires protection against dust, noise, and material projection. Main operator cabins must not exceed specific noise limits (85dB(A)) and must be equipped with air purification systems to maintain dust concentrations below 2mg/m³. Control systems must feature emergency stop devices at every operating position and comply with GB/T 16855.1 for safety-related parts. The standard also details requirements for moving parts protection, requiring guards for rotating and transmission components, especially eccentric blocks of inertial vibrators. Electrical equipment must have reliable grounding and comply with GB 5226.1, while hydraulic and lubrication systems must include temperature or pressure monitoring devices to prevent hazards from leaks or overpressure. Additionally, it specifies requirements for installation and maintenance, emphasizing that maintenance work should be performed during shutdowns. If maintenance must be done while operating, strict safety protocols, including dual-person monitoring and accessible emergency stops, are mandated. Fire prevention measures require fire-resistant materials in operator cabins and the placement of portable fire extinguishers.

Prüfverfahren

Testing and verification primarily involve checking compliance with referenced standards. Noise measurement at the operator position must be conducted according to GB/T 13325. Vibration testing for operator seats follows the methods specified in GB/T 8419. Dust concentration in the operator cabin is measured using the procedures outlined in GB/T 5748.

Häufige Fragen

What products are regulated under GB 25519-2010?

GB 25519-2010 regulates mineral processing feeders, specifically plate, belt, chain, reciprocating, disc, screw, scraper, and vibrating feeders used to continuously and uniformly feed materials to processing equipment.

Is GB 25519-2010 a mandatory standard?

Yes, except for Chapter 3 (which is recommended), the rest of the standard is mandatory. Manufacturers must comply with these safety requirements to sell their equipment in China.

What are the key safety requirements for operator cabins under this standard?

Operator cabins must protect against dust, noise, and material projection. Key limits include a maximum noise level of 85dB(A), dust concentration not exceeding 2mg/m³, and vibration acceleration not exceeding 1.25m/s². Cabins must also be made of fire-resistant materials.

The summary above provides a high-level overview of GB 25519-2010. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 25519-2010 today to access all detailed parameters, tables, and testing procedures.

Hinweise zur Anwendbarkeit

Normtyp: Sicherheit
CCS: D96
ICS: 73.120
Zuständige Behörde: Ministry of Industry and Information Technology
Technisches Komitee: Ministry of Industry and Information Technology