GB6969-2026

Fire suction hose

消防吸水管

GB 6969-2026 est une norme nationale chinoise obligatoire à venir : Fire suction hose. Secteur : Construction. Thème principal : Sécurité des produits. Entrée en vigueur : 1 mars 2027.

L’applicabilité dépend du périmètre du produit, de la voie de certification, des avis des autorités et des règles de transition. Demandez une traduction ou vérifiez la source avant d’utiliser cette fiche pour une décision de conformité.

Aperçu de conformité

Cet aperçu n’est actuellement disponible qu’en anglais.

Champ d’application

This standard applies to fire suction hoses used for extracting water or foam liquid during firefighting and rescue operations. It covers hoses made of rubber and plastic materials, classified into straight and coiled types. It is not applicable to other types of fire hoses or non-firefighting industrial hoses. The standard references GB 12514 for interface performance requirements.

Exigences techniques

The standard specifies comprehensive performance criteria for fire suction hoses. Structural and material requirements mandate specific layer compositions for rubber and plastic hoses, ensuring durability and flexibility. Dimensional and mass limits are established for internal diameter, length, and unit length mass to guarantee compatibility and operational efficiency. Pressure and vacuum performance are critical, with defined limits for rated working pressure, test pressure, and burst pressure. Hoses must withstand specified vacuum levels without delamination or collapse. Additionally, the standard sets criteria for bending and flexing performance, ensuring hoses maintain integrity under various load and temperature conditions. Aging resistance is addressed through UV radiation testing for plastic hoses and ozone resistance testing for rubber hoses. The standard also mandates minimum interlayer adhesion strength for rubber hoses to prevent layer separation during use.

Méthodes d’essai

Testing procedures include hydrostatic and burst pressure tests to evaluate pressure resistance, and vacuum tests to assess structural integrity under negative pressure. Bending and flexing tests are conducted at both room and low temperatures to simulate field conditions. Aging tests involve UV exposure for plastics and ozone exposure for rubber components. Dimensional and mass measurements are performed using precision instruments like vernier calipers and steel tape measures.

Questions fréquentes

What products are regulated under GB 6969-2026?

GB 6969-2026 regulates fire suction hoses used for extracting water or foam liquid, including both rubber and plastic types in straight or coiled forms.

Are there any updates from the previous version of GB 6969?

Yes, this version replaces GB 6969-2005. Key updates include the addition of plastic suction hose requirements, interface performance criteria, UV and ozone aging tests, and revised testing methods for bending and vacuum performance.

How does GB 6969-2026 address interface performance?

The standard requires that hose interfaces comply with GB 12514, ensuring compatibility and reliability of connections used in firefighting operations.

The summary above provides a high-level overview of GB 6969-2026. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 6969-2026 today to access all detailed parameters, tables, and testing procedures.

Indications d’applicabilité

Type: Produit
CCS: C84
ICS: 13.220.20
Autorité compétente: National Fire and Rescue Administration
Comité technique: National Technical Committee on Fire Protection of Standardization Administration of China

Relations

Remplace:GB 6969-2005 (En vigueur)