GB26503-2011

Rapid prototyping machines - Technical requirements for safeguarding

快速成形机床安全防护技术要求

GB 26503-2011은(는) 현행 중국 강제 국가 표준입니다: Rapid prototyping machines - Technical requirements for safeguarding. 산업: 전자. 주제: 제품 안전. 시행일: 2012년 4월 1일.

적용 여부는 제품 범위, 인증 경로, 주관 당국 공고, 전환 규정에 따라 달라집니다. 컴플라이언스 판단에 사용하기 전에 번역을 의뢰하거나 공식 출처를 확인하세요.

컴플라이언스 개요

이 개요는 현재 영어로만 제공됩니다.

적용 범위

This standard specifies the safeguarding technical requirements for rapid prototyping machines. It applies to all types of rapid prototyping machines, including those utilizing fused deposition modeling and laser-based technologies. Manufacturers must ensure these safety measures are integrated into the machine design and operation.

기술 요구 사항

The standard outlines comprehensive mechanical safety requirements, addressing stability, sharp edges, and moving parts. It mandates the use of interlocking devices for enclosed processing chambers to prevent operation when guards are open. Machine designs must eliminate hazards through inherently safe methods or adequate safeguarding devices. For control systems, the standard requires reliable functionality, fault tolerance, and the inclusion of emergency stop controls. Electrical safety mandates specific protection levels for cabinets (e.g., IP54) and proper insulation and voltage resistance testing. Control system failures must not lead to hazardous situations. It also covers specific hazards related to temperature control, laser radiation, and harmful substances. The standard sets limits on noise emissions and requires proper ventilation for dust and fumes generated during the forming process. Manufacturers must provide comprehensive user information detailing all safety protocols and hazard warnings.

시험 방법

Compliance is verified through a combination of visual inspections, manual checks, and specific testing procedures. Key tests include electrical safety tests (protection bonding continuity, insulation resistance, and dielectric withstand) conducted according to GB 5226.1. Additionally, harmful substance detection and noise measurement (limited to 70dB(A)) are required to verify environmental and operational safety compliance.

자주 묻는 질문

What products are regulated under GB 26503-2011?

GB 26503-2011 regulates all types of rapid prototyping machines, including those based on fused deposition and laser processing technologies.

Is GB 26503-2011 a mandatory standard?

Yes, Chapters 5 to 7 of this standard are mandatory, while the remaining sections are recommended.

What is the maximum allowable noise level for these machines?

The standard specifies that the noise sound pressure level of the machine shall not exceed 70dB(A).

The summary above provides a high-level overview of GB 26503-2011. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 26503-2011 today to access all detailed parameters, tables, and testing procedures.

적용 참고 사항

유형: 안전
CCS: J59
ICS: 25.080.99
주관 부처: Ministry of Industry and Information Technology
기술 위원회: Ministry of Industry and Information Technology