GB26503-2011
Rapid prototyping machines - Technical requirements for safeguarding
快速成形机床 安全防护技术要求
GB 26503-2011 is a current mandatory Chinese national standard for Rapid prototyping machines - Technical requirements for safeguarding. It appears in the Electronics compliance cluster with a product safety focus and has an implementation date of Apr 1, 2012.
Applicability depends on product scope, certification route, competent authority notices and transition rules. Requst for the translation or verify source before using this record in a compliance decision.
Compliance overview
Scope and applicability
This standard specifies the safeguarding technical requirements for rapid prototyping machines. It applies to all types of rapid prototyping machines, including those utilizing fused deposition modeling and laser-based technologies. Manufacturers must ensure these safety measures are integrated into the machine design and operation.
Technical requirements
The standard outlines comprehensive mechanical safety requirements, addressing stability, sharp edges, and moving parts. It mandates the use of interlocking devices for enclosed processing chambers to prevent operation when guards are open. Machine designs must eliminate hazards through inherently safe methods or adequate safeguarding devices. For control systems, the standard requires reliable functionality, fault tolerance, and the inclusion of emergency stop controls. Electrical safety mandates specific protection levels for cabinets (e.g., IP54) and proper insulation and voltage resistance testing. Control system failures must not lead to hazardous situations. It also covers specific hazards related to temperature control, laser radiation, and harmful substances. The standard sets limits on noise emissions and requires proper ventilation for dust and fumes generated during the forming process. Manufacturers must provide comprehensive user information detailing all safety protocols and hazard warnings.
Testing methods
Compliance is verified through a combination of visual inspections, manual checks, and specific testing procedures. Key tests include electrical safety tests (protection bonding continuity, insulation resistance, and dielectric withstand) conducted according to GB 5226.1. Additionally, harmful substance detection and noise measurement (limited to 70dB(A)) are required to verify environmental and operational safety compliance.
FAQs
What products are regulated under GB 26503-2011?
GB 26503-2011 regulates all types of rapid prototyping machines, including those based on fused deposition and laser processing technologies.
Is GB 26503-2011 a mandatory standard?
Yes, Chapters 5 to 7 of this standard are mandatory, while the remaining sections are recommended.
What is the maximum allowable noise level for these machines?
The standard specifies that the noise sound pressure level of the machine shall not exceed 70dB(A).
The summary above provides a high-level overview of GB 26503-2011. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 26503-2011 today to access all detailed parameters, tables, and testing procedures.
Applicability hints
- Type
- Safety
- CCS
- J59
- ICS
- 25.080.99
- Competent department
- Ministry of Industry and Information Technology
- Technical committee
- Ministry of Industry and Information Technology
Relationships
Replaced by:GB 46037-2025 (Upcoming)