Описание на русском · Доступен перевод
GB19044-2022
Minimum allowable values of energy efficiency and energy efficiency grades of fluorescent lamps for general lighting
普通照明用荧光灯能效限定值及能效等级
GB 19044-2022 — действующий обязательный национальный стандарт Китая: Minimum allowable values of energy efficiency and energy efficiency grades of fluorescent lamps for general lighting. Отрасль: Строительство. Тема: Энергоэффективность. Дата вступления в силу: 1 янв. 2024 г..
Применимость зависит от продукции, схемы сертификации, уведомлений компетентных органов и переходных правил. Закажите перевод или проверьте источник, прежде чем использовать эту запись в решениях по соответствию.
Обзор требований
Этот обзор пока доступен только на английском языке.
Область применения
This standard applies to fluorescent lamps for general lighting, including self-ballasted fluorescent lamps (3W~60W), self-ballasted electrodeless fluorescent lamps (10W~60W), double-ended fluorescent lamps, single-ended fluorescent lamps, and single-ended electrodeless fluorescent lamps (30W~400W). It is not applicable to self-ballasted fluorescent lamps with covers. This standard is mandatory for manufacturers targeting the Chinese market.
Технические требования
The standard classifies energy efficiency into 3 grades, with Grade 1 being the highest. The minimum allowable value of energy efficiency corresponds to Grade 3. It specifies luminous efficacy requirements based on rated power and color tone (RR, RZ, RL, RB, RN, RD). Additionally, it sets requirements for lumen maintenance after 2000 hours of operation, with specific thresholds for different lamp types. For lamps using tri-phosphor fluorescent powder, the general color rendering index (Ra) must not be less than 80. The initial measured color rendering index shall not decrease by more than 3 compared to the rated value.
Методы испытаний
Testing methods for luminous efficacy, correlated color temperature, color rendering index, and lumen maintenance are conducted according to referenced standards: GB/T 17263 for self-ballasted fluorescent lamps, GB/T 10682 for double-ended fluorescent lamps, GB/T 17262 for single-ended fluorescent lamps, GB/T 21091 for self-ballasted electrodeless fluorescent lamps, and GB/T 34841 for single-ended electrodeless fluorescent lamps.
Частые вопросы
What products are regulated under GB 19044-2022?
It regulates various fluorescent lamps for general lighting, including self-ballasted, double-ended, single-ended, and electrodeless types.
What is the minimum allowable value of energy efficiency?
The minimum allowable value corresponds to Grade 3 of the energy efficiency grades specified in the standard.
Does GB 19044-2022 replace previous standards?
Yes, it replaces GB 19043-2013, GB 19044-2013, GB 19415-2013, GB 29142-2012, and GB 29144-2012.
The summary above provides a high-level overview of GB 19044-2022. To ensure complete compliance for your products entering the Chinese market, a precise and professional translation of the full technical specifications is essential. Purchase our high-quality English translation of GB 19044-2022 today to access all detailed parameters, tables, and testing procedures.
Подсказки по применимости
- Тип
- Управление
- CCS
- F01
- ICS
- 27.010
- Компетентное ведомство
- Standardization Administration of China
- Технический комитет
- National Technical Committee on Energy Fundamentals and Management of Standardization Administration of China
Связи
Заменяет:GB 19044-2013, GB 19043-2013, GB 19415-2013, GB 29142-2012, GB 29144-2012